Conclusions
-
1.
Under certain conditions sulfur is a suitable alloying element for cast iron that increases the strength and ductility due to the fact that it slows down primary graphitization during solidification of the ingot and imparts a compact form to the graphite inclusions after graphitization annealing or self-annealing.
-
2.
By a combination of simple technological measures it is possible to obtain castings which are cheaper than those of gray cast iron and with operating characteristics superior to those of malleable iron and high-strength cast iron.
Similar content being viewed by others
Literature cited
N. G. Girshovich, Cast Iron Castings [in Russian], Metallurgizdat, Moscow (1949).
A. A. Zhukov and G. P. Yaremenko, "Nature of the chilling effect of sulfur and chromium on structure of cast irons," Izv. Vuzov, Chernaya Metallurgiya, No. 9, 136–138 (1972).
A. A. Zhukov and G. P. Yaremenko, "Effect of elements from groups V and VI on activity of carbon in the ledeburite transformation," Izv, Vuzov, Chernaya Metallurgiya, No. 5, 145–149 (1973).
A. A. Zhukov and G. P. Yaremenko, "Effect of sulfur on temperature of eutectic transformation in Fe−C−S system," Zh. Fiz. Khim., No. 9, 2350–2351 (1974).
Additional information
Moscow Automobile Factory Higher Technical School. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 5, pp. 39–43, May, 1975.
Rights and permissions
About this article
Cite this article
Zhukov, A.A., Shalashov, V.A., Osmantsev, A.G. et al. High-sulfur cast iron with high strength. Met Sci Heat Treat 17, 404–408 (1975). https://doi.org/10.1007/BF00663218
Issue Date:
DOI: https://doi.org/10.1007/BF00663218