Advertisement

Metal Science and Heat Treatment

, Volume 16, Issue 9, pp 792–794 | Cite as

Fine structure of wire of steel 45 melted from sponge iron

  • Z. V. Overchenko
  • A. V. Smirnova
  • D. A. Litvinenko
Technical Information
  • 14 Downloads

Conclusions

  1. 1.

    The structure of steel melted from sponge iron is characterized by a smaller quantity of excess ferrite and larger dispersity of the structural components.

     
  2. 2.

    The ductility of cementite platelets is higher than in steel melted from ordinary scrap iron, evidently due to the smaller quantity of impurities in the steel.

     

Keywords

Iron Ferrite Ductility Sponge Fine Structure 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    Yu. V. Vladimirov and V. G. Mol'nar, "Increasing the durability of steel cables," Byulleten' TsIINChM, 22, 5 (1969).Google Scholar
  2. 2.
    A. A. Glagolev, Geometric Methods of Quantitative Analysis of Aggregates under a Microscope [in Russian], Gosgeolitizdat, Moscow-Leningrad (1941), p. 156.Google Scholar
  3. 3.
    S. A. Saltykov, Stereometric Metallography [in Russian], Metallurgiya, Moscow (1970).Google Scholar

Copyright information

© Plenum Publishing Corporation 1975

Authors and Affiliations

  • Z. V. Overchenko
  • A. V. Smirnova
  • D. A. Litvinenko

There are no affiliations available

Personalised recommendations