Advertisement

Metal Science and Heat Treatment

, Volume 12, Issue 5, pp 421–423 | Cite as

Effect of nonmetallic inclusions on the impact resistance of low-carbon steel

  • E. L. Kharish
  • S. A. Zlotnikov
  • S. Ya. Yarema
  • A. B. Kuslitskii
  • V. L. Mizetskii
Technical Information
  • 19 Downloads

Conclusions

  1. 1.

    Of the four types of nonmetallic inclusions, the plastic (unsaturated) silicates lead to the lowest impact resistance and the silicon oxides to the highest.

     
  2. 2.

    The type of nonmetallic inclusions has a greater effect on the resistance of transverse samples — at room temperature for medium stresses and at negative temperature for low stresses.

     

Keywords

Oxide Silicon Silicate Lower Impact Nonmetallic Inclusion 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    S. Ya. Yarema and E. L. Kharish, FKhMM, No. 4 (1967).Google Scholar
  2. 2.
    A. Ya Borisov and V. L. Mizetskii, in: Metallurgy, No. 10 [in Russian], Sudostroenie (1967).Google Scholar
  3. 3.
    V. S. Ivanova et al., Fatigue and Brittleness of Metallic Materials [in Russian], Nauka, Moscow (1968).Google Scholar
  4. 4.
    A. B. Kuslitskii et al., Dokl. Akad. Nauk SSSR,187, No. 1 (1969).Google Scholar

Copyright information

© Consultants Bureau 1970

Authors and Affiliations

  • E. L. Kharish
  • S. A. Zlotnikov
  • S. Ya. Yarema
  • A. B. Kuslitskii
  • V. L. Mizetskii

There are no affiliations available

Personalised recommendations