Conclusions
-
1.
Cyaniding of steel by paste with the use of induction heating is a progressive method of chemical and heat treatment. The use of active paste on heating to 1200°C ensures within 30–35 sec, a diffusion layer having a thickness of 0.3 mm.
-
2.
After quenching, the microhardness of the diffusion layer, depending on the heating conditions, can reach Hμ=1100.
-
3.
The diffusion layers are plastic and have a high corrosion resistance. Short-time high-temperature heating does not cause a noticeable growth of austenite grains.
Similar content being viewed by others
Literature cited
A. S. Barshcheva and V. S. Gnuchev, MiOM (1957) No. 7.
N. V. Figrer, Vestnik machinostroeniya (1951) No. 8.
A. N. Minkevich and G. N. Ulybin, MiOM (1959) No. 4.
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 3, pp. 29–33, March, 1964
Rights and permissions
About this article
Cite this article
Prosvirin, V.I., Evtikhov, G.V. High-speed high-temperature cyaniding by pastes with induction heating. Met Sci Heat Treat 6, 150–154 (1964). https://doi.org/10.1007/BF00657715
Issue Date:
DOI: https://doi.org/10.1007/BF00657715