Metal Science and Heat Treatment

, Volume 9, Issue 1, pp 49–51 | Cite as

Effect of phosphorus on the structure and properties of 5Kh20N4AG9 steel

  • K. A. Verner
  • V. D. Zelenova
  • V. M. Doronin
  • A. F. Buinov
Stainless Steels
  • 14 Downloads

Conclusions

  1. 1.

    Alloying austenitic chromium-manganese-nickel steel 5Kh20N4AG9 with phosphorus in amounts up to 0.2% improves the mechanical properties of the steel at elevated and room temperatures.

     
  2. 2.

    The best combination of mechanical properties is obtained by alloying with 0.2% P and up to 1% Mo.

     
  3. 3.

    The addition of about 0.2% P increases the intensity of precipitation hardening (carbides of the Cr23C6 type and Cr2N nitrides) after quenching and subsequent aging. Phosphorus does not enter into the composition of the carbides and nitrides but is found in the solid solution.

     

Keywords

Precipitation Mechanical Property Phosphorus Carbide Solid Solution 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    M. V. Pridantsev and D. A. Litvinenko, Coll: Special Steels and Alloys [in Russian], Moscow, Metallurgizdat (1960).Google Scholar

Copyright information

© Consultants Bureau 1967

Authors and Affiliations

  • K. A. Verner
  • V. D. Zelenova
  • V. M. Doronin
  • A. F. Buinov

There are no affiliations available

Personalised recommendations