Advertisement

Metal Science and Heat Treatment

, Volume 11, Issue 1, pp 35–36 | Cite as

Boriding of die steels

  • L. M. Sorkin
Chemicothermal Treatment

Conclusions

  1. 1.

    Boriding of dies effectively increases the resistance to periodically changing thermomechanical influences.

     
  2. 2.

    The optimal conditions for electrolytic boriding are 3.5 h at 920–950°C at a current density of 0.15 A/cm2.

     

Keywords

Optimal Condition Electrolytic Boriding 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Literature cited

  1. 1.
    L. M. Sorkin, Kuznechno-Shtampovochnoe Proizvodstvo, No. 12 (1964).Google Scholar
  2. 2.
    G. I. Yukin, in: Chemicothermal Treatment of Steels and Alloys [in Russian], Z. L. Regirera (editor), LDNTP (1961).Google Scholar
  3. 3.
    L. S. Lyakhovich and L. G. Voroshnin, Boriding of Steels [in Russian], Metallurgiya, Moscow (1967).Google Scholar
  4. 4.
    N. D. Tyuteva and A. I. Fal'kov, Izv. Tomsk. Politekh. Inst.,96, No. 1 (1959).Google Scholar
  5. 5.
    M. A. Balter, I. S. Dukarevich, and G. Ya. Gol'dshtein, Metal. i Term. Obrabotka Metal., No. 12 (1964).Google Scholar
  6. 6.
    L. M. Sorkin, Juznechno-Shtampovochnoe Proizvodstvo, No. 3 (1966).Google Scholar

Copyright information

© Consultants Bureau 1969

Authors and Affiliations

  • L. M. Sorkin

There are no affiliations available

Personalised recommendations