Literature cited
Standard Heat Treatment Technology for Metal-Working Tools, Parts 1 and 2 [in Russian], NIIMASh, Moscow (1966).
E. A. Smol'nikov, Metalloved. i. Term. Obrabotka Metal., No. 3 (1962).
E. A. Smil'nikov, In: Rept. All-Union Sci.-Tech. Conf. on Progressive Methods of Heat Treating Machine Parts and Tools [in Russian], GOSINTI (1966).
L. V. Volkova, In: Technology of Heat Treatment for Cutting and Knurling Tools [in Russian], Izd. MDNTP (1965).
L. V. Podgurskii, In: Technology of Heat Treatment for Cutting and Knurling Tools [in Russian], Izd. MDNTP (1965).
E. A. Smol'nikov, Heat Treatment of Tools [in Russian], NTO Mashprom, Profizdat (1960).
E. A. Smol'nikov, Stanki i instr., No.7 (1963).
E. A. Smol'nikov and R. P. Leshchinskaya, Selection of Proper Hardening Media and Quality Control Methods for Tool Industry [in Russian], NIIMASh, OMTRM 5306-001-65 (1965).
A. P. Gulyaev, E. A. Lebedeva, and V. V. Sokolovskaya, Vest., Mashinostr., No. 8 (1953).
K. A. Malinina, Metalloved. i Term. Obrabotka Metal., No. 3 (1960).
E. A. Smol'nikov and Yu. P. Shkurin, Stanki i Instr., No. 7 (1966).
A. P. Gulyaev, et al., Metalloved. i Term. Obrabotka Metal., No. 11 (1958).
E. A. Smol'nikov, In: New Methods of Heat Treatment in Fused Salts and Alkalis [in Russian], Gor'kovskoe knizhn. izd. (1955).
O. Schaber, Metal Progress, No. 3 (1956).
E. A. Smol'nikov and F. I. Zhdanova, Salt Baths for Heat Treating Parts [in Russian], Mashgiz, Moscow (1963).
E. A. Smol'nikov, In: Methods and Practices in Metallographic Investigations of Tool Steels [in Russian], Mashgiz, Moscow (1961).
Yu. A. Geller, Tool Steels [in Russian], Metallurgizdat, Moscow (1961).
V. A. Landa and L. A. Chudnovskaya, Stanki i Instr., No. 2 (1958).
Additional information
All-Union Scientific Research Institute of Tools. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No.5, pp. 46–53, May, 1967.
Rights and permissions
About this article
Cite this article
Smol'nikov, E.A. Technology of heat treatment in the tool industry. Met Sci Heat Treat 9, 373–379 (1967). https://doi.org/10.1007/BF00655028
Issue Date:
DOI: https://doi.org/10.1007/BF00655028