Literature cited
N. P. Shchapov, Effect of Cold Straightening on the Strength of Steel Parts, Trudy VNIIZhT, No. 77 [in Russian], Moscow, Transzheldorizdat (1953).
V. G. Vorob'ev, Overcoming Distortion of Heat Treated Parts in Machine and Instrument Construction. Series on Metal Science and Heat Treatment, No. 8 [in Russian], Izd. LDNTP (1962).
V. N. Biryukova, In: Prevention of Distortion During Heat Treatment of Parts and Stabilization of the Dimensions of Manufactured Parts [in Russian], Izd. MDNTP (1966).
I. I. Sidorin and N. I. Solov'eva, In: MVTU: Metal Science and Heat Treatment of Metals [in Russian], Moscow, Mashgiz (1955).
V. I. Dobatkin, In: Light Alloys, No.1 [in Russian], Moscow, Izd. AN SSSR (1958).
N. A. Loktionova, Liteinoe Proiz., No. 8 (1963).
E. Buckingham, Metal Prog.,77, 2 (1960).
V. G. Vorob'ev, Metalloved. i Term. Obrabotka Metal., No. 3 (1958).
V. G. Vorob'ev, Izv. Vuzov SSSR, Mashinostroenie, No. 8 (1960).
V. G. Vorob'ev, Izv. Akad. Nauk SSSR, Metal. i Gornoe Delo, No.1 (1964).
A. A. Presnyakov, Physical Nature of the Anomaly of Plasticity in Metallic Alloys [in Russian], Izd. Akad. Nauk KazSSR (1963).
M. E. Blanter, I. M. Sergeichev and N. A. Kulakov, Metalloved. i Term. Obrabotka Metal., No.12 (1958).
M. A. Shtremel', Fiz. Met. i Metallov,13, 6 (1962).
V. G. Vorob'ev and I.Kh. Lokshin, Thermal Stabilization of the Dimensions of Precision Metal Parts. GOSINTI, Advanced Scientific Technical and Commercial Practices. Heat and Chemicothermal Treatments of Metals, No.10, Theme 7 [in Russian], Moscow (1962).
O. Yu. Kotsyubinskii, Warping of Cast Iron Castings from Residual Stresses [in Russian], Moscow, Mashinostroenie (1965).
O. E. Kotsyubinskii et al., In: Trudy ÉNIMS [in Russian], Moscow, Mashgiz (1962 and 1964–65); Liteinoe proizvodstvo, Nos. 8 and 12 (1964).
A. G. Rakhshtadt, Spring Alloys [in Russian], Moscow, Metallurgiya (1965).
Metal Prog.,76, 8 (1959).
V. G. Vorob'ev and I. Kh. Lokshin, Metalloved. i Term. Obrabotka Metal., No.4 (1964).
Additional information
ÉNIMS. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No.5, pp. 40–46, May, 1967.
Rights and permissions
About this article
Cite this article
Vorob'ev, V.G. Development of heat treatment technology in mass production of machines. Met Sci Heat Treat 9, 367–372 (1967). https://doi.org/10.1007/BF00655027
Issue Date:
DOI: https://doi.org/10.1007/BF00655027