Literature cited
Metal. i Term. Obrabotka Metal., No. 10 (1966); Nos. 6 and 9 (1967); No. 4 (1968).
R. McClintock and R. Hauser, Advan. Cryogenic Eng.,8 (1964).
V. F. Gaiduchenya, D. V. Lebedev, and B. V. Molotilov, Fiz. Metal. i Metalloved.,24, No. 3 (1967).
C. S. Barrett, Structure of Metals, McGraw-Hill Book Co., New York (1952).
D. V. Lebedev, B. V. Molotilov, and B. M. Ovsyannikov, in: Special Steels and Alloys [in Russian]. No. 39, Metallurgiya, Moscow (1965).
J. W. Christian and B. Masters, Proc. Roy. Soc. (London),281, No. 1385 (1964).
W. D. Biggs and P. L. Pratt, Acta Met.,61, 69 (1958).
N. P. Zhetvin et al., Commercially Pure Iron [in Russian], Metallurgizdat, Moscow (1962).
A. N. Cottrell and B. A. Bilby, Proc. Roy. Soc. (London),62 (1949).
G. P. Zaitsev, Fiz. Metal. i Metalloyed.,2, No. 3 (1956).
A. P. Gulyaev and N. A. Kozlova, in Special Steels and Alloys [in Russian], No. 46, Metallurgiya, Moscow (1966).
A. P. Gulyaev and N. I. Lifanov, Transactions of the Moscow Evening Mechanical Engineering Institute [in Russian], No. 2, Metallurgizdat, Moscow (1955).
N. A. Kozlova and D. V. Lebedev, Metal. i Term. Obrabotka Metal., No. 12 (1965).
G. V. Uzhik, Strength and Plasticity of Metals at Low Temperatures [in Russian], Izd. AN SSSR (1957).
N. N. Davidenkov, The Problem of Impact in Metal Science [in Russian], Izd. AN SSSR (1938).
Ya. B. Fridman, Deformation and Fracture of Metals under Static and Impact Loads [in Russian], Oborongiz (1946).
G. V. Uzhik, Resistance to Fracture and Strength of Metals [in Russian], Izd. AN SSSR (1950).
H. Neiber, Stress Concentrations [Russian translation], ONTI (1947).
A. N. Grubin and Yu. I. Likhachev, Zh. Tekh. Fiz.,25, No. 3 (1955).
A. Harlich and J. Watson, Metal Progress,79, No. 4 (1961).
D. V. Lebedev and N. A. Sorokina, Metal. i Term. Obrabotka Metal., No. 6 (1967).
S. I. Gudkov, D. V. Lebedev, and B. M. Ovsyannikov, Metal. i Term. Obrabotka Metal., No. 4 (1968).
L. P. Rink and L. G. Vertyukova, Metal. i Term. Obrabotka Metal., No. 6 (1967).
V. Ya. Il'ichev et al., Metal. i Term. Obrabotka Metal., No. 10 (1966).
B. A. Drozdovskii and Ya. B. Fridmann, Effect of Cracks on Mechanical Properties of Structural Steels [in Russian], Metallurgizdat, Moscow (1960).
R. G. Arone et al., Metal. i Term. Obrabotka Metal., No. 10 (1966).
L. S. Livshits and A. S. Rakhmanov, Zavod. Lab., No. 12 (1959); No. 12 (1967).
g. Orner and C. Hartbower, Welding J.,36, No. 12 (1957).
A. P. Gulyaev, Zavod. Lab., No. 4 (1967).
Otani, Tetsudo Gidzyutsu Kenkyu Sire,14, No. 11 (1957).
R. G. Arone, Zavod. Lab., No. 7 (1964).
V. I. Sarrak, UFN, No. 7 (1959).
Ya. B. Fridman, T. K. Zilova, et al., Zavod. Lab., No. 10 (1967).
ASTM, No. 243 (1960).
ASTM,4, No. 3 (1964).
G. Irwin and J. Kies, Proceedings of the Golden Gate Metals Conference (1960).
R. Davis and W. Quist, Mater. Design. Eng.,62, No. 5 (1965).
B. A. Drozdovskii, Zavod. Lab., Nos. 4–5 (1964).
M. V. Pridantsev et al., Zavod. Lab., No. 9 (1966).
Additional information
TsNIIChERMET. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 7, pp. 74–78, July, 1968.
Rights and permissions
About this article
Cite this article
Lebedev, D.V., Ovsyannikov, B.M. Structural reliability of steels and alloys at low temperatures. Met Sci Heat Treat 10, 570–575 (1968). https://doi.org/10.1007/BF00654374
Issue Date:
DOI: https://doi.org/10.1007/BF00654374