Conclusions
-
1.
Crucibles should be made of 18/8 and 25/20 nickel steels with additions of titanium and molybdenum.
-
2.
Crucibles must be welded with suitable electrodes to produce weld seams with a chemical composition as close as possible to that of the base metal.
-
3.
The cathodic protection of the crucible was selected with a protective current of 0.7 A/dm2. During warming or cooling of the bath the protective current is turned on or off at bath temperatures no higher than 700°C. The protection is continuous.
-
4.
The adoption of these recommendations will increase the reliability and ensure working lives up to 4000 h.
Similar content being viewed by others
Literature cited
S. L. Rustem, Collection of Reports of the All-Union Scientific-Technical Conference in Leningrad on “Progressive methods of heat treating machine parts and tools” [in Russian], Moscow (1966).
A. N. Minkevich, Metal. i Term. Obrabotka Metal., No. 3 (1964).
A. N. Minkevich, Chemicothermal Treatments of Metals and Alloys [in Russian], Metallurgiya, Moscow (1965).
F. F. Khimushin, Stainless Steels [in Russian], Metallurgiya Moscow (1967).
Additional information
Comintern Sinel'nikovskii Plant. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 7, pp. 36–37, July, 1968.
Rights and permissions
About this article
Cite this article
Shalya, M.A., Bordyug, G.N. Wear of electrolytic boronizing crucibles. Met Sci Heat Treat 10, 531–532 (1968). https://doi.org/10.1007/BF00654359
Issue Date:
DOI: https://doi.org/10.1007/BF00654359