Conclusions
-
1.
None of the metals tested has an absolute resistance in mother liquor either at high or low temperature.
-
2.
The most stable metal at low and high temperatures is the VT1 alloy and the chromium carbide alloy containing 15% Ni.
-
3.
In hot mother liquor only highly alloyed chromium steels are stable; the most stable are Kh23N28M3D3T, Kh17N13M2T, and Kh25N15MDA steels. The corrosion rate of these steels is less than 0.1 mm/year.
-
4.
Steels not alloyed with titanium and steels with low chromium and nickel concentrations and no more than 2% Mo can be used in contact with mother liquor, but they are less resistant than Kh23N18, Kh17N12M2T, Kh18N9T, Kh27N5MT, etc.
-
5.
Low nickel steels, medium chromium steel without nickel, chromium steel with molybdenum, and low alloyed structural steels are inadequate for use in contact with mother liquor solution.
-
6.
Molybdenum decreases the corrosion resistance of chromium steel in mother liquor solutions.
Similar content being viewed by others
Literature cited
Handbook on Machine Construction Materials, Vol. 1 [in Russian], Moscow, Mashgiz (1959).
Additional information
Kommunar Mining-Metallurgical Institute Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 2, pp. 48–49, February, 1966
Rights and permissions
About this article
Cite this article
Vladimirov, L.P., Shusterman, M.I., Konikova, R.S. et al. Resistance of alloyed steels to corrosion and erosion. Met Sci Heat Treat 8, 142–144 (1966). https://doi.org/10.1007/BF00652609
Issue Date:
DOI: https://doi.org/10.1007/BF00652609