Corrosion resistance of steels with a low concentration of nickel in aggressive media
We have shown that the resistance of homogeneous ferritic—austenitic stainless steels to pitting corrosion is ensured by increasing the chromium concentration and by additional alloying with molybdenum.
We have shown the possibility of replacing chromium—nickel steels of the Kh18N10T type with steels with a lower nickel concentration in several corrosive media (sea water, iron chloride, dilute nitric acid, etc.).
KeywordsIron Nickel Chromium Stainless Steel Molybdenum
Unable to display preview. Download preview PDF.
- 1.U. Evans, "J. Electrochem. Soc.," (1956), No. 1.Google Scholar
- 2.H. Grafen, "Metalloberflache," (1959), Vol. 3, No. 6.Google Scholar
- 3.N. D. Tomashov, et al., "Influence of alloyed elements on the susceptibility of stainless chronium-nickel steels to pitting corrosion," Coll.: Corrosion of Metals and Alloys [in Russian], Moscow, Metallurgizdat (1963).Google Scholar
- 4.G. V. Akimov, Fundamentals of the Study of Corrosion and Protection of Metals [in Russian], Moscow, Metallurgizdat (1946).Google Scholar
- 5.W. S. Flint and W. I. Tott, "Metallurgia," (1955), Vol. 51.Google Scholar
- 6.N. P. Talov, "High strength widely available steels," in Coll: Transactions of the Central Scientific Research Institute of Ferrous Metallurgy [in Russian], Moscow, Metallurgizdat (1960).Google Scholar
- 7.M. M. Kurtepov and E. F. Bochkareva, "Corrosion of stainless steels in solutions of iron chloride," in Coll.: Corrosion of Metals and Alloys [in Russian], Moscow, Metallurgizdat (1963).Google Scholar
- 8.N. I. Kakhovskii, K. A. Yushchenko, Z. V. Yushkevich, and Z. F. Istrina, Avtomaticheskaya svarka (1962), No. 11.Google Scholar
- 9.N. I. Kakhovskii, et al., Avtomaticheskaya svarka (1963), No. 12.Google Scholar