Literature cited
S. S. Shteinberg, “Heat treatment of steel wire in drawing,” Zh. Russk. Metallurg. Obshchestva, No. 1 (1925).
V. Ya. Zubov, Patenting of Wire [in Russian], Metallurgizdat, Moscow (1945).
A. Pomp, Stahl und Eisen,21 (1965).
A. Pomp, et al., Mitt. K.W.I., No. 5 (1930).
E. A. Shipli, in High-Strength Steel [in Russian], Metallurgizdat, Moscow (1965).
K. D. Potemkin, Heat Treatment and Drawing of High-Strength Wire [in Russian], Metallurgizdat, Moscow (1963).
N. Petch, J. Iron and Steel Inst.,174, No. 25 (1953).
N. G. Peteh, Atomic Mechanism of Failure [Russian translation], Metallurgizdat, Moscow (1963).
A. Stroh, Adv. in Phys.,6, No. 24 (1957).
G. Embury and R. Fisher, Acta Metallurgica, No. 14 (1966).
G. Embury, A. Keh, and R. Fisher, Trans. Met. Soc. AIME,236, No. 9 (1966).
V. N. Gridnev and Yu. Ya. Meshkov, “Strength and cold shortness of pearlitic steel,” in: Metal Physics, No. 35 [in Russian], Naukova Dumka, Kiev (1971), p. 49.
K. N. Tulenkov, et al., Stal', No. 9 (1956).
V. N. Gridney, et al., Metal Physics, No. 23 [in Russian], Naukova Dumka, Kiev (1969).
V. N. Gridnev and Yu. Ya. Meshkov, Structural Creterion of Ultimate Strength of Steel [in Russian], ONTI IMF Akad. Nauk USSR, Kiev (1969).
V. Ya. Zubov, et al., Steel Ropes, No. 6 [in Russian], Tekhnika, Kiev (1960).
I. A. Yukhvets, Wire Drawing Production, Part I [in Russian], Metallurgizdat, Moscow (1954).
I. A. Yukhvets, Wire Drawing Production, Part II [in Russian], Metallurgizdat (1960).
A. A. Sazonova, Byulleten' TsNII Inform. Chern. Metall., No. 25 (1964).
V. Ya. Zubov and V. R. Baraz, izv. Vuzov, Chern. Metall., No. 6 (1966).
V. Ya. Zubov, et al., Izv. Vuzov. Chern. Metall., No. 10 (1966).
N. V. Sokolov, et al., Steel Ropes, No. 5 [in Russian], Tekhnika, Kiev (1968).
V. Ya. Zubov, et al., Stal', No. 7 (1965).
V. Ya. Zubov, et al., Izv. Akal. Nauk SSSR, Metally, No. 2 (1966).
V. Ya. Zubov, et al., Fiz. Metall. i Metallovedenie,28, No. 1 (1969).
V. N. Gridnev, et al., Byulleten' TsNII Inform. Chern. Metall. Seriya 11, No. 18 (1965).
Additional information
Urals Polytechnical Institute. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 9, pp. 49–56, September, 1972.
Rights and permissions
About this article
Cite this article
Zubov, V.Y. Patenting of steel wire. Met Sci Heat Treat 14, 793–800 (1972). https://doi.org/10.1007/BF00652032
Issue Date:
DOI: https://doi.org/10.1007/BF00652032