Advertisement

Metal Science and Heat Treatment

, Volume 10, Issue 8, pp 627–628 | Cite as

Nitrocementation of gears

  • A. S. Sidel'nikova
  • O. V. Gordin
Technical Information
  • 14 Downloads

Conclusions

  1. 1.

    In manufacturing high-quality gears precisely one-third of the whole tolerance must be allowed for machining and two-thirds for nitrocementation.

     
  2. 2.

    The dependability and durability of drilling apparatus using nitrocementated gears of steel 30KhGT are far greater than those with nitrided gears of steel 30KhYuA.

     
  3. 3.

    Nitrocementation is a shorter process than nitriding and nitrocementated gears have higher mechanical properties and less warping than those of nitrided gears.

     

Keywords

Mechanical Property Drilling Nitrided Short Process High Mechanical Property 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Literature cited

  1. 1.
    A. D. Assonov, Modern Methods of Heat Treatment [in Russian], Mashgiz, Moscow (1964).Google Scholar
  2. 2.
    E. S. Venttsel', Theory of Probability [in Russian], Fizmatgiz (1962).Google Scholar

Copyright information

© Consultants Bureau 1969

Authors and Affiliations

  • A. S. Sidel'nikova
  • O. V. Gordin

There are no affiliations available

Personalised recommendations