Conclusions
Commonness and differences in yarn structure formation by high-temperature and low-temperature stretching have been shown.
Model concepts on the development of structure in high-temperature deformation during the process of high-speed yarn spinning have been examined.
It has been found that, on changing the linear density of elementary filaments, the spinning speed, or the position of the lubricating device, the proportion of effective high-temperature and low-temperature deformations changes.
Similar content being viewed by others
Literature cited
H. M. Heuvel and R. Huisman, J. Appl. Polymer Sci.,22, 2229–2243 (1978).
J. Shimizu, N. Okui, Sen-i Gakkaishi, J. Soc. Fiber Sci. Technol. Jpn.,33, No. 5, 58–64 (1977);34, No. 2, 42–49 (1978);38, No. 11, 9–17 (1982).
J. Shimizu and N. Okui, Sen-i Gakkaishi, J. Soc. Fiber Sci. Technol. Jpn.,39, No. 11, 47–52 (1983).
A. Ziabicki, Sen-i Gakkaishi, J. Soc. Fiber Sci. Technol. Jpn.,38, No. 9, 409–417 (1982).
W. Dietrich, G. Reichelt, and H. Renkert, Chemiefasern/Textilind.,32, No. 9, 612–625 (1982).
S. A. Baranova, S. A. Gribanova, et al., Vysokomol. Soed., Ser. A,22, No. 3, 536–542 (1980).
B. N. Averkiev, V. É. Geller, and É. M. Aizenshtein, Fourth International Symposium on Man-Made Fibres, Kalinin (1986). Preprints, Vol. 2, pp. 76–82.
S. A. Gribanov, Yu. I. Mitchenko, et al., Vysokomol. Soed., Ser. A,17, No. 11, 2468–2474 (1975).
J. W. Hill and J. A. Cuculo, J. Appl. Polymer Sci., Appl. Polymer Symp.,33, 3–29 (1978).
A. J. McHugh and G. Silebi, Polymer Eng. Sci.,16, No. 3, 158–162 (1976).
R. R. Lagane and B. Maxwell, Polymer Eng. Sci.,16, No. 3, 189–199 (1976).
M. R. Mackley, Colloid Polymer Sci.,253, No. 5, 373–379 (1975).
Additional information
Translated from Khimicheskie Volokna, No. 3, pp. 16–19, May–June, 1988.
Rights and permissions
About this article
Cite this article
Geller, V.É., Gribanov, S.A. Structure formation in high-speed spinning of polyethylene terephthalate. Fibre Chem 20, 173–178 (1989). https://doi.org/10.1007/BF00633047
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00633047