References
B. c. H. STEELE, J. H. BECHTOLD, R. K. SLOTWINSKI, N. BONANOS and E. P. BUTLER, in “Advances in ceramics”, Vol. 3 (American Ceramic Society, Westerville, Ohio, 1981) p. 286.
A. S. NOWICK, in “Point defects in solids”, Vol. 1, edited by J. H. Crawford and L. M. Slifkin (Plenum Press, New York, 1972) p. 151.
M. OZAWA, T. HATANAKA and H. HASEGAWA,J. Ceram. Soc. Jpn. 99 (1991) 643.
M. OZAWA and H. HASEGAWA,J. Mater. Sci. in press.
H. M. KANDIL, J. D. GREINER and J. F. SMITH,J. Amer. Ceram. Soc. 67 (1984) 341.
S. KUDO and M. OZAWA,Jpn. J. Appl. Phys. 28 (Suppl 2) (1989) 184.
M. OZAWA and S. KUDO,J. Ceram. Soc. Jpn. 98 (1990) 987.
J. W. ADAMS, H. H. NAKAMURA, R. P. INGEL and R. W. RICE,J. Amer. Ceram. Soc. 68 (1985) C228.
A. S. NOWICK,Adv. Phys. 16 (1967) 1.
D. H. NIBLETT and J. WILKS,ibid. 9 (1960) 1.
O. YOSHINARI and N. KOIWA,Mater. Trans. JIM 30 (1989) 46.
I. G. RITCHIE, Z.-L. PAN and F E. GOODWIN,Met. Trans. 22A (1991) 627.
G. N. MARSCHER, P. PIROUZ and A. H. HEUER,J. Amer. Ceram. Soc. 74 (1991) 491.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ozawa, M., Hasegawa, H. Internal friction of 9.4 mol% Y2O3-ZrO2 cubic single crystal. J Mater Sci Lett 12, 1625–1626 (1993). https://doi.org/10.1007/BF00627032
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00627032