Journal of Applied Electrochemistry

, Volume 7, Issue 3, pp 253–256 | Cite as

High-conductivity solid copper ion conductors: the sulphonium halide-copper(I) halide systems

  • T. Takahashi
  • N. Wakabayashi
  • O. Yamamoto
Article

Abstract

The electrical conductivities of the copper (I) halide-sulphonium halide systems were measured and high conductivity copper ion conductors were found in the copper (I) iodide-1-methyl-1-thioniacyclohexane iodide (C5H10SCH3I) and copper (I) iodide-4-methyl-1, 4-oxathianium iodide (C4H8OSCH3I) systems. The dependence of electrical conductivity on the composition showed that the maximum conductivity appeared at 83.4 mol% CuI for these two systems. The highest conductivities of the systems, CuI-C5H10SCH3I and CuI-C4H8OSCH3I, were 1.4×10−3 and 7.2×10−4 (Ω cm)−1 at 25‡ C, respectively. The conduction in these systems was essentially ionic.

Keywords

Copper Physical Chemistry Electrical Conductivity Iodide Halide 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    T. Takahashi, O. Yamamoto and S. Ikeda,J. Electrochem. Soc. 120 (1973) 1431.Google Scholar
  2. [2]
    T. Takahashi and O. Yamamoto,ibid 122 (1975) 83.Google Scholar
  3. [3]
    A. F. Sammells, J. Z. Gougoutas and B. B. Owens,ibid 122 (1975) 1291.Google Scholar
  4. [4]
    T. Takahashi, N. Wakabayashi and O. Yamamoto,ibid 123 (1976) 129Google Scholar
  5. [5]
    B. M. Trost, W. L. Schinski and I. B. Mantz,J. Amer. Chem. Soc. 91 (1969) 4320.Google Scholar
  6. [6]
    C. Wagner, Proc. 7th Meeting C.I.T.C.E., Lindau (1955) Butterworths, London (1957) p. 361.Google Scholar

Copyright information

© Chapman and Hall Ltd. 1977

Authors and Affiliations

  • T. Takahashi
    • 1
  • N. Wakabayashi
    • 1
  • O. Yamamoto
    • 1
  1. 1.Department of Applied Chemistry, Faculty of EngineeringNagoya UniversityNagoyaJapan

Personalised recommendations