Advertisement

Mechanics of Composite Materials

, Volume 27, Issue 3, pp 342–345 | Cite as

Orientation of polyethylene in stretching in liquid media

  • V. Yu. Barinov
Article
  • 23 Downloads

Keywords

Polyethylene Liquid Medium 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    A. N. Tynnyi, Strength and Failure of Polymers in Liquid Media [in Russian], Kiev (1975).Google Scholar
  2. 2.
    A. L. Volynskii and N. F. Bakecv, The Highly Disperse Oriented State of Polymers [in Russian], Moscow (1984).Google Scholar
  3. 3.
    Infrared Spectroscopy of Polymers [Russian translation], I. Dekhant (ed.), Moscow (1976).Google Scholar
  4. 4.
    M. A. McRae, W. F. Maddams, and J. E. Preedy, “An infrared spectroscopic and X-ray diffraction study of cold-drawn high density polyethylene samples,” J. Mater. Sci.,11, No. 11, 2036–2044 (1976).Google Scholar
  5. 5.
    V. Yu. Barinov, “Effect of deformation recrystallization on the mechanical properties of the polymer matrix,” Mekh. Kompozitn. Mater., No. 6, 1112–1114 (1986).Google Scholar
  6. 6.
    V. Yu. Barinov, “Effect of physically active liquid media on the resistance of crystallizable polymers to mechanical loads,” Vysokomolek. Soedin.,B25, No. 4, 229–232 (1983).Google Scholar
  7. 7.
    P. L. Soni and P. H. Geil, “Environmental stress cracking of polyethylene: temperature effect,” J. Appl. Polym. Sci.,23, No. 9, 1167–1179 (1979).Google Scholar
  8. 8.
    P. F. van Hutten, C. E. Koning, and A. J. Pennings, “Drawing of polyethylene shishkebabs studied by scanning electron microscopy,” Macromol. Chem., Rapid Commun.,4, No. 9, 605–612 (1983).Google Scholar
  9. 9.
    S. G. Karpova, A. A. Popov, L. G. Privalova, and G. E. Zaikov, “Mechanism of the effect of stretching loads on the molecular mobility of oriented amorphous-crystalline polymers,” Vysokomolek. Soedin.,A25, No. 11, 2446–2451 (1983).Google Scholar
  10. 10.
    C. J. Singleton, E. Roche, and P. H. Geil, “Environmental stress cracking of polyethylene,” J. Appl. Polym. Sci.,21, No. 9, 2319–2340 (1977).Google Scholar
  11. 11.
    A. L. Volynskii, A. Sh. Shtanchaev, and N. F. Bakeev, “Mechanism of inelastic deformation of high-density polyethylene in contact with a plasticizing liquid — heptane,” Vysokomolek. Soedin.,A26, No. 11, 24445–2449 (1984).Google Scholar

Copyright information

© Plenum Publishing Corporation 1991

Authors and Affiliations

  • V. Yu. Barinov
    • 1
  1. 1.G. V. Karpenko Institute of PhysicomechanicsAcademy of Sciences of the Ukrainian SSRL'vov

Personalised recommendations