Advertisement

Journal of Applied Electrochemistry

, Volume 7, Issue 1, pp 1–29 | Cite as

Electrochemical machining

  • J. Bannard
Review

Abstract

To the end of 1974 the scientific literature contained over 1200 articles on electrochemical machining (ECM) [1]. Additionally approximately 100 papers appeared in 1975. Although a large number of those references appeared in what might be described as ‘non-learned’ journals, this still leaves the potential student with a difficult task if he wishes to review the state of the art. This is the first attempt to review thoroughly the literature in this field, although only a small proportion of those contributions are considered pertinent. The review will take the following form: after an introductory chapter there will be two chapters on dissolution kinetics, the second concerned with the kinetics as affected by the physical characteristics of the electrolyte; this will be followed by a section on the effects of electrochemically machined surface on the physical properties of a metal. Chapters 5 and 6 will deal with tool design and the optimizing of process parameters, after which will be a review of topics concerned with the application of ECM.

Keywords

Fatigue Life Mild Steel Surface Finish Current Efficiency Electrochemical Machine 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    J. Bannard and L. Bannard, ‘Bibliography of Electrochemical Machining’, Department of Metallurgy and Materials Science, University of Nottingham, (1975).Google Scholar
  2. [2]
    V. N. Gusev and L. A. Rozhkov, Authors Certificate 28384 (1928).Google Scholar
  3. [3]
    V. N. Gusev, Brit. Pat. 335003 (1928).Google Scholar
  4. [4]
    Y. N. Petrov and A. L. Vishnitski,Elektronnaya Obrabot. Mat. 5 (1967) 36.Google Scholar
  5. [5]
    I. I. Moroz,Zh. Vsesoy, Khim. Obsh. D.I. Mendeleev,8 (1964) 544.Google Scholar
  6. [6]
    idem, Stanki i Instrument9 (1967) 36.Google Scholar
  7. [7]
    Y. S. Volkov,ibid 9 (1967) 33.Google Scholar
  8. [8]
    A. H. Bagramyan,Elekronnya Obrabot. Mat. 5 (1968) 21.Google Scholar
  9. [9]
    E. Y. Grodzinsky,Fizika i Khim Obrabot. Mat. 5 (1968) 52.Google Scholar
  10. [10]
    V. S. Krylov, A. D. Davydov and J. Kozak,Elektrokhimiya 11 (1975) 1155.Google Scholar
  11. [11]
    J. H. Crawford, SAE Paper 505C (1962).Google Scholar
  12. [12]
    N. D. G. Mountford,Trans. Inst. Metal Finishing,40 (1963) 171.Google Scholar
  13. [13]
    A. E. Debarr, NewScientist,23 Part 398 (1964) 40.Google Scholar
  14. [14]
    Idem, Metalworking Prod.108 (1964) 66.Google Scholar
  15. [15]
    J. A. Gurklis, Defence Materials Inf. Centre, Report 213 (1965).Google Scholar
  16. [16]
    D. L. Norwood, ASTME Tech. Paper MR66-157 (1966).Google Scholar
  17. [17]
    Idem, Machinery (London)109 (1966) 239.Google Scholar
  18. [18]
    J. A. Cross, ASTME Tech. Paper MR67-640 (1967).Google Scholar
  19. [19]
    P. J. Boden and P. A. BrookThe Production Engineer (1969) 408.Google Scholar
  20. [20]
    P. A. Brook,Metals and Materials,3 (1969) 359.Google Scholar
  21. [21]
    J. P. Hoare and M. A. Laboda,Scient. Am. 230 (1974) 30.CrossRefGoogle Scholar
  22. [22]
    A. D. Davydov and V. D. Kashcheev,Itogi Nauki i Teknici Elektrokhimiya,9 (1974) 154.Google Scholar
  23. [23]
    A. E. Debarr and D. A. Oliver, ‘Electrochemical Machining’, McDonald, London, (1968). Reprinted by M.T.I.R.A., Macclesfield, England.Google Scholar
  24. [24]
    J. F. Wilson, ‘Practice and Theory of Electrochemical Machining’, Wiley, New York, (1971).Google Scholar
  25. [25]
    J. A. McGeough, ‘Principles of Electrochemical Machining’ Chapman and Hall, London, (1974).Google Scholar
  26. [26]
    W. B. Stevenson,Products Finishing,26 (1962) 36.Google Scholar
  27. [27]
    M. Schmeisser, H. Latka and N. Bemelmans,Ind. Anz. 89 (1967) (23), 37.Google Scholar
  28. [28]
    P. Warburton,Prod. Eng. 44 (1965) 520.Google Scholar
  29. [29]
    J, Throop, ASTME Tech. Paper SP66-41 (1965).Google Scholar
  30. [30]
    B. S. Miller,Metalworking,22 (1966) 50.Google Scholar
  31. [31]
    A. L. Livshits,Stanki i Instrument 1 (1967) 14.Google Scholar
  32. [32]
    B. R. Lazarenko,Elekronnaya Obrabot. Mat. 5 (1967) 3.Google Scholar
  33. [33]
    L. Y. Popilov, ‘Electrophysical and electrochemical machining of materials’ Mashinostroenya, Moscow (1969).Google Scholar
  34. [34]
    M. Pourbaix, ‘Atlas of Electrochemical Equilibria’ Pergamon, London (1966).Google Scholar
  35. [35]
    U. R. Evans,Electrochim. Acta 16 (1971) 1825.Google Scholar
  36. [36]
    H. H. Uhlig,Trans. Electrochem. Soc. 85 (1944) 307.Google Scholar
  37. [37]
    K. Schwabe,Angewandte Chem. (Int. Edition)5 (1966) 185.Google Scholar
  38. [38]
    K. E. Heusler,Z. Elektrochem. 62 (1958) 582.Google Scholar
  39. [38]a.
    Idem, Chem. Ing. Tech.36 (1964) 589.Google Scholar
  40. [39]
    P. A. Jacquet,Metal Finishing,47 (1949) 48.Google Scholar
  41. [40]
    H. F. Walton,J. Electrochem. Soc. 97 (1950) 219.Google Scholar
  42. [41]
    J. M. West, ‘Electrodeposition and Corrosion Processes’, Van Nostrand London, (1970).Google Scholar
  43. [42]
    M. Cole and T. P. Hoar, CITCE 8 (Now ISE) Butterworth, London, (1958) p. 115.Google Scholar
  44. [43]
    T. P. Hoar and T. W. Farthing,Nature 169 (1952) 324.Google Scholar
  45. [44]
    T. P. Hoar and J. A. S. Mowat,Nature 165 (1950) 64.Google Scholar
  46. [45]
    M. Turner and P. A. Brook,Electrodeposition and Surface Treatment,2 (1973/4) 245.Google Scholar
  47. [46]
    D. Landolt, R. H. Müller and C. W. Tobias,J. Electrochem. Soc. 118 (1971) 40.Google Scholar
  48. [47]
    Idem, ibid116 (1969) 1384.Google Scholar
  49. [48]
    K. Kinoshita, D. Landolt, R. H. Müller and C. W. Tobias,ibid 117 (1970) 1246.Google Scholar
  50. [49]
    T. P. Hoar, D. C. Mears and G. P. Rothwell,Corr. Sci. 5 (1965) 279.Google Scholar
  51. [50]
    T. P. Hoar and D. C. Mears,Proc. Roy. Soc. 294A (1966) 486.Google Scholar
  52. [51]
    T. P. Hoar,Coor. Sci. 7 (1967) 341.Google Scholar
  53. [52]
    J. M. Evans and P. J. Boden ‘Fundamentals of Electrochemical Machining’, Electrochemical Society, (1971).Google Scholar
  54. [53]
    T. P. Hoar,Discussions Faraday Society 1 (1947) 299.Google Scholar
  55. [54]
    Idem, ‘Modern Aspects of Electrochemistry, Vol. 2’, (Ed. J. O'M. Bockris), Butterworths, London (1959).Google Scholar
  56. [55]
    I. L. Rozenfeld and I. S. Danilov,Zashch. Metallov. 2 (1966) 134.Google Scholar
  57. [56]
    M. Pourbaix,International Conf. Localised Corrosion, Williamsburg, Virginia, (1971).Google Scholar
  58. [57]
    V. Ashworth, P. J. Boden, J. S. L. Leach and A. Y. Nehru,Corr. Sci. 10 (1970) 481.Google Scholar
  59. [58]
    U. F. Franck,Proc. 1st Int. Corr. Congress, London, (1961).Google Scholar
  60. [59]
    T. P. Hoar,Trans. Farady Soc. 33 (1937) 1152.Google Scholar
  61. [60]
    H. W. Pickering and R. P. Frankenthal,Int. Conf. Localised Corrosion, Williamsburg, Virginia, (1971).Google Scholar
  62. [61]
    V. M. Novakowski and A. N. Sorokina,Corr. Sci. 6 (1966) 227.Google Scholar
  63. [62]
    J. M. Kolotyrkin,Zashch. Metallov. 1 (1965) 161.Google Scholar
  64. [63]
    D. M. Brasher,Brit. Corr. J. 2 (1967) 95.Google Scholar
  65. [64]
    J. B. Cotton and I. Dugdale,Corr. Sci. 4 (1964) 397.Google Scholar
  66. [65]
    S. Ito and K. Chikamori,J. Mech. Lab. (Tokyo)17 (1963) 9.Google Scholar
  67. [66]
    S. Ito, H. Yamamoto and K. Chikamori,ibid 21 (1967) 103.Google Scholar
  68. [67]
    S. Ito and H. Yamamoto,ibid 22 (1968) 149.Google Scholar
  69. [68]
    G. A. Alexeev, Yu. S. Volkov, M. A. Monina and I. I. Moroz,Fiz. i Khim. Obrabot Mat. 5 (1968) 31.Google Scholar
  70. [69]
    A. D. Davydov, L; L. Knots, V. D. Kashcheev and V. V. Kushnev,Elektronnaya Obrabrot. Mat. 2 (1969) 82.Google Scholar
  71. [70]
    K. Chikamori and S. Ito,J. Mech. Lab. (Tokyo)22 (1968) 155.Google Scholar
  72. [71]
    J. P. Hoare, M. A. Laboda, M. L. MacMillan and A. J. Wallace,J. Electrochem. Soc. 116 (1969) 199.Google Scholar
  73. [72]
    J. P. Hoare,ibid 117 (1970) 142.Google Scholar
  74. [73]
    K. Chikamori and S. Ito,Denki Kagaku 38 (1970) 492.Google Scholar
  75. [74]
    D. T. Chin, ‘Fundamentals of ECM’ Electrochem. Soc. (1971).Google Scholar
  76. [75]
    K-W. Mao,J. Electrochem. Soc. 120 (1973) 1056.Google Scholar
  77. [76]
    A. J. Levin, M. A. Evseeva and A. V. Nechaev,Elektronnaya Obrabot. Mat. 5 (1973) 5.Google Scholar
  78. [77]
    G. N. Zaidman and A. I. Loskutov,ibid 5 (1973) 18.Google Scholar
  79. [78]
    J. P. Simpson and P. A. Brook,J. Appl. Electrochem. 4 (1974) 163.Google Scholar
  80. [79]
    A. D. Davydov, A. N. Kamkin, S. V. Klopova and V. D. Kashcheev,Electronnaya Obrabot. Mat. 6 (1973) 28.Google Scholar
  81. [80]
    Yu. S. Volkov, M. A. Monina and I. I. Moroz,ibid. 3 (1972) 11.Google Scholar
  82. [81]
    Brit. Pat. 1031663.Google Scholar
  83. [82]
    O. A. Vodyanitsky, M. A. Monina and I. I. Moroz,Fiz. i Khim. Obrabot. Mat. 11 (1968) 45.Google Scholar
  84. [83]
    K-W. Mao,J. Electrochem. Soc. 118 (1971) 1870.Google Scholar
  85. [84]
    Idem, ibid118 (1971) 1876.Google Scholar
  86. [85]
    K-W. Mao, M. A. Laboda, and J. P. Hoare,ibid 119 (1972) 419.Google Scholar
  87. [86]
    D-T. Chin,ibid 119 (1972) 1181.Google Scholar
  88. [87]
    D-T. Chin and A. J. Wallace,ibid 120 (1973) 1487.Google Scholar
  89. [88]
    K-W. Mao and D-T. Chin,ibid 121 (1974) 191.Google Scholar
  90. [89]
    D-T. Chin and K-W. Mao,J. Appl. Electrochem. 4 (1974) 155.Google Scholar
  91. [90]
    J. P. Hoare,Nature 219 (1968) 1034.Google Scholar
  92. [91]
    P. J. Boden and J. M. Evans,ibid 222 (1969) 377 andElectrochim. Acta 16 (1971) 1071.Google Scholar
  93. [92]
    A. D. Davydov, A. D. Romashkan, M. A. Monina and V. D. Kashcheev,Elektrokhimiya 10 (1974) 1681.Google Scholar
  94. [93]
    E. S. Varenki, V. P. Galushko, N. D. Koshmanenko and F. M. Kiselchuck,Elektronnaya Obrabot. Mat. 2 (1974) 49.Google Scholar
  95. [94]
    M. Datta and D. Landolt,J. Electrochem. Soc. 122 (1975) 1466.Google Scholar
  96. [95]
    D. Landolt.Chem.-Ing. Tech. 45 (1973) 188.Google Scholar
  97. [96]
    J. P. Hoare, K-W. Mao and A. J. Wallace,Corrosion 27 (1971) 211.Google Scholar
  98. [97]
    D-T. Chin.J. Electrochem. Soc. 119 (1972) 1043.Google Scholar
  99. [98]
    J. P. Hoare, K-W. Mao and A. J. Wallace,Corr. Sci. 12 (1972) 571.Google Scholar
  100. [99]
    N. J. Pryor and M. Cohen,J. Electrochem. Soc. 100 (1953) 203.Google Scholar
  101. [100]
    J. P. Hoare and K-W. Mao,ibid 120 (1973) 1452.Google Scholar
  102. [101]
    K-W. Mao and D-T. Chin.ibid 121 (1974) 191.Google Scholar
  103. [102]
    M. A. Laboda, A. J. Chartrand, J. P. Hoare, C. R. Wiese and K-W. Mao,ibidJ. Electrochem. Soc. 120 (1973) 643.Google Scholar
  104. [103]
    K. J. Vetter, ‘Electrochemical Kinetics’, Academic, New York, (1967).Google Scholar
  105. [104]
    D. Landolt,J. Electrochem. Soc. 119 (1972) 708.Google Scholar
  106. [105]
    H. E. Freer, J. B. Hanley and G. D. S. McLellan, ‘Fundamentals of Electrochemical Machining’, Electrochem. Soc. (1971).Google Scholar
  107. [106]
    J. P. Hoare and C. R. Wiese,Corr. Sci. 15 (1975) 435.Google Scholar
  108. [107]
    J. A. Gurklis, ASTME, Tech. Paper EM67-641 (1967).Google Scholar
  109. [108]
    Anon,Tool Manufac. Eng. 58 (1967) 82.Google Scholar
  110. [109]
    A. D. Davydov, V. D. Kashcheev, and V. P. Krivenky,Elektronnaya Obrabot. Mat. 1 (1973) 5.Google Scholar
  111. [110]
    D. J. Royer, J. Kleinberg and A. W. Davidson,J. Inorg. Nucl. Chem. 4 (1957) 115.Google Scholar
  112. [111]
    T. V. Kuleshova,Elektronnaya Obrabot. Mat. Part 6 (1968) 24.Google Scholar
  113. [112]
    J. Bannard,J. Appl. Electrochem. 4 (1974) 229.Google Scholar
  114. [113]
    K. Chikamori and S. Ito,Denki Kagaku 39 (1971) 493.Google Scholar
  115. [114]
    Brit. Pat. 1033005.Google Scholar
  116. [115]
    K-W. Mao and J. P. Hoare,Corr. Sci. 13 (1973) 799.Google Scholar
  117. [116]
    A. G. Atanasyants, A. F. Ivanovsky, D. Ya. Dlugach and Ts. O. Georgiev,Zhur. Fiz. Khim. 48 (1974) 366.Google Scholar
  118. [117]
    N. A. Amirkhanova, A. K. Zhuravski and N. G. Uskova,Elektronnaya Obrabot. Mat. 6 (1972) 19.Google Scholar
  119. [118]
    Brit. Pat. 958401.Google Scholar
  120. [119]
    Brit. Pat. 985158.Google Scholar
  121. [120]
    V. D. Kulagin,Elektronnaya Obrabot. Mat. 5 (1971) 16.Google Scholar
  122. [121]
    P. A. Brook and Q. Iqbal,J. Electrochem. Soc. 116 (1969) 1458.Google Scholar
  123. [122]
    J. Bannard,J. Appl. Electrochem. 4 (1974) 117.Google Scholar
  124. [123]
    V. I. Mutsianko, E. S. Stepanov and T. V. Kuleshova,Elektronnaya Obrabot. Mat. 2 (1973) 89.Google Scholar
  125. [124]
    A. N. Belyakova, A. D. Davydov, B. N. Kabanov and V. D. Kashcheev,Fiz. i. Khim. Obrabot. Mat. 2 (1969) 49.Google Scholar
  126. [125]
    A. D. Davydov and B. N. Kabanov,Elektronnaya Obrabot Mat. 2 (1974) 10.Google Scholar
  127. [126]
    A. D. Davydov and V. D. Kashcheev,Fiz. i. Khim. Obrabot. Mat. 5 (1968) 40.Google Scholar
  128. [127]
    A. D. Davydov, B. N. Kabanov and V. D. Kascheev,ibid 1 (1970) 48.Google Scholar
  129. [128]
    V. N. Misra, P. R. Khangaonkar and V. M. Dokras,J. Inst. Eng. (India)50 (1969) (2) 6.Google Scholar
  130. [129]
    H. Yamamoto and S. Ito,J. Mech. Lab. (Tokyo)4 (1970) 224.Google Scholar
  131. [130]
    Brit. Pat. 936871.Google Scholar
  132. [131]
    Brit. Pat. 1257061.Google Scholar
  133. [132]
    V. V. Parshutin and Yu. N. Petrov,Elektronnaya Obrabot. Mat. 6 (1969) 17.Google Scholar
  134. [133]
    I. A. Menzies and A. F. Averill,Electrochim. Acta.13 (1968) 807.Google Scholar
  135. [134]
    I. A. Menzies, D. Geary and G. B. Griffin,J. Electrochem. Soc. 117 (1970) 849.Google Scholar
  136. [135]
    J. E. Bannard, P. J. Boden and P. A. Brook,I.E.E. Conf. Publ. 133 (1975) 147.Google Scholar
  137. [136]
    Brit. Pat. 1359104.Google Scholar
  138. [137]
    N. H. Cook, S. P. Loutrel and M. C. Meslink,M.I.T. Report AD659004 (Jan. 1967).Google Scholar
  139. [138]
    D. G. Lovering, 23rd ISE Meeting, Stockholm (1972) Abstr. p. 103.Google Scholar
  140. [139]
    D. L. Piron, S. Asakura and K. Nobe,Int. Symp. Metal-Slag-Gas reactions, Electrochem Soc. (1975) 625.Google Scholar
  141. [140]
    R. K. Flatt and P. A. Brook,Corr. Sci. 11 (1971) 185.Google Scholar
  142. [141]
    R. A. Robinson and R. H. Stokes, ‘Electrolyte Solutions’, Butterworth, London (1959) 466.Google Scholar
  143. [142]
    A. D. Davydov, E. Ya. Grodzinski and A. N. Kamkin,Elektrokhimiya 9 (1973) 518.Google Scholar
  144. [143]
    N. Shikata, S. Ito and K. Kikuchi,Bull. Jap. Soc. Pree. Eng. 3 (1969) 61.Google Scholar
  145. [144]
    B. P. Saushkin, G. N. Korchagin and G. V. Kuleshov,Elektronnaya Obrabot. Mat. 1 (1974) 21.Google Scholar
  146. [145]
    Ya. N. Petrov, G. N. Zaidman and B. P. Saushkin,ibid 5 (1974) 17.Google Scholar
  147. [146]
    B. P. Saushkin,ibid 2 (1975) 21 and 3 (1975) 14.Google Scholar
  148. [147]
    S. Ito, K. Honda and T. Hayashi,J. Mech. Lab. (Tokyo)18 (1964) (5) 7.Google Scholar
  149. [148]
    V. A. Timoveev, V. V. Klokov, and V. P. Smolentsov,Elektronnaya Obrabot. Mat. 6 (1972) 10.Google Scholar
  150. [149]
    Ya. N. Petrov, G. N. Zaidman, B. P. Saushkin and N. A. Ferdman,ibid 1 (1975) 24.Google Scholar
  151. [150]
    F. V. Sedykin, L. B. Dmitriev, V. V. Borodin and V. V. Lyubimov,ibid 1 (1973) 11.Google Scholar
  152. [151]
    A. I. Levin and A. V. Nechaev,ibid 1 (1971) 12.Google Scholar
  153. [152]
    N. H. Cook, G. B. Foote, P. Jordan and B. N. Kalyani,J. Eng. Ind (1973) 945.Google Scholar
  154. [153]
    C. F. Noble and S. J. Shine,J. Appl. Electrochem. 5 (1975) 215.Google Scholar
  155. [154]
    K. S. Indira, S. K. Rangarajan and K. S. G. Doss,J. Electroanal. Chem. 21 (1969) 49.Google Scholar
  156. [155]
    J. Postlethwaite and A. Kell,J. Electrochem. Soc. 119 (1972) 1351.Google Scholar
  157. [156]
    J. Cooper, R. H. Müller and C. W. Tobias, ‘Fundamentals of Electrochemical Machining’, Electrochem. Soc. (1971).Google Scholar
  158. [157]
    J. Hopenfeld and R. R. Cole,J. Eng. Ind. (1966) 455.Google Scholar
  159. [158]
    V. V. Klokov and V. P. Smolentsov,Elektronnaya Obrabot. Mat. 4 (1972) 13.Google Scholar
  160. [159]
    G. N. Zaidman, V. V. Parshutin and Yu. N. Petrov,Fiz. i. Khim. Obrabot. Mat. 2 (1969) 53.Google Scholar
  161. [160]
    D. Landolt, R. Acosta, R. H. Müller and C. W. Tobias,J. Electrochem. Soc. 117 (1970) 839.Google Scholar
  162. [161]
    J. W. Throop, ASTME, Tech. Paper MR69-573 (1969).Google Scholar
  163. [162]
    T. P. Lohouse,ibid MR67-645 (1967).Google Scholar
  164. [163]
    W. P. Huhn,ibid MR67-646 (1967).Google Scholar
  165. [164]
    F. A. Pitschke,ibid MR65-115 (1965).Google Scholar
  166. [165]
    Yu. S. Volkov and I. I. Moroz,Elektronnaya Obrabot. Mat. 5 (1968) 17.Google Scholar
  167. [166]
    S. P. Loutrel and N. H. Cook, ASME Publ. No. 3 (1973).Google Scholar
  168. [167]
    K. Seimija and S. Ito,J. Mech. Eng. Lab. (Tokyo)26 (1972) (2) 69.Google Scholar
  169. [168]
    V. P. Kiselev,Elektronnaya Obrabot. Mat. 1 (1970) 19.Google Scholar
  170. [169]
    V. V. Grigorev, V. A. Shmanov, and Ya. A. Sirazh,ibid 4 (1968) 19.Google Scholar
  171. [170]
    K. Seimiya and S. Ito,Bull. Jap. Soc. Proc. Eng. 4 Part 2 (1970) 49.Google Scholar
  172. [171]
    S. Ito, K. Chikamori, A. Kogure and T. Mori,J. Mech. lab. (Tokyo)19 Part 2 (1965) 17.Google Scholar
  173. [172]
    S. Ito, K. Chikamori and F. Sakurai,ibid 20 Part 2 (1966) 1.Google Scholar
  174. [173]
    G. E. Gadd,Nature 212 (1966) 874.Google Scholar
  175. [174]
    L. Kops and V. B. Quach,Proc. N. Am. Metalwork Res. Conf. (May 1973) p. 159.Google Scholar
  176. [175]
    Idem304/5 (1975) 16.Google Scholar
  177. [176]
    D. K. Pramanik, R. A. Agarural and A. K. De,Machinery (London)126 (1975) 224.Google Scholar
  178. [177]
    C. N. Larsson and T. Pyle, ‘Fundamentals of electrochemical machining’, Electrochem. Soc. (1971).Google Scholar
  179. [178]
    G. N. Zaidman, V. V. Parshutin and Yu. N. Petrov,Fiz. i. Khim. Obrabot. Mat. 6 (1968) 41.Google Scholar
  180. [179]
    G. N. Zaidman, G. L. Mochalova and Yu. N. Petrov,ibid 1 (1970) 36.Google Scholar
  181. [180]
    A. D. Davydov, G. N. Korchagin and V. D. Kashcheev,Elektronnaya Obrabot. Mat. 4 (1975) 9.Google Scholar
  182. [181]
    J. W. Cuthbertson and T. S. Turner,The Production Engineer (May 1966) 270.Google Scholar
  183. [182]
    R. M. Wolosewicz, ASTME, Tech. Paper MR70-220 (1970).Google Scholar
  184. [183]
    E. Rössner and L. Franke,Technik. 26 (1971) 504.Google Scholar
  185. [184]
    S. P. Loutrel and N. H. Cook, ASME Publ. No.1 (1973).Google Scholar
  186. [185]
    Brit. Pat. 954557.Google Scholar
  187. [186]
    J. Bannard,J. Appl. Electrochem. 5 (1975) 43.Google Scholar
  188. [187]
    H. Dietz, K. Otto and G. Stark,V.D.I. Zeit 109 (1967) 1057.Google Scholar
  189. [188]
    F. V. Sedykin,Elektronnaya Obrabot. Mat. 2 (1967) 24.Google Scholar
  190. [189]
    V. D. Kashcheev, S. V. Klopova and A. D. Davydov,ibid 1 (1969) 12.Google Scholar
  191. [190]
    L. A. Williams,I.E.E.E. Trans. Ind. Electr. 10 (1963) 101.Google Scholar
  192. [191]
    Brit. Pat. 1317945.Google Scholar
  193. [192]
    Brit. Pat. 1320000.Google Scholar
  194. [193]
    Brit. Pat. 1041766.Google Scholar
  195. [194]
    Brit. Pat. 1072952.Google Scholar
  196. [195]
    S. Ito, K. Chikamori and F. Sakurai,J. Mech. Lab. (Tokyo)20 (1966) 146.Google Scholar
  197. [196]
    V. V. Morosov, E. I. Pupkov, B. L. Orlov and V. I. Gnidin,Technol. Mashinstr. Tula21 (1971) 66.Google Scholar
  198. [197]
    M. Minca,Constr. Masini 25 (1973) 665.Google Scholar
  199. [198]
    Brit. Pat. 1240929.Google Scholar
  200. [199]
    U. Buttner,Technik 21 (1966) 554.Google Scholar
  201. [200]
    V. V. Vasilev and Yu. M. Sukhorukov,Stankt i Instr. 9 (1975) 28–9.Google Scholar
  202. [201]
    Brit. Pat. 789293.Google Scholar
  203. [202]
    Brit. Pat. 1074749.Google Scholar
  204. [203]
    B. I. Morozov and G. N. Zaidman,Elektronnaya Obrabot. Mat. 4 (1973) 17; and B. I. Morozov,ibid 6 (1974) 26.Google Scholar
  205. [204]
    N. A. Amirkhanova, Ya. M. Bikbaev, N. Z. Gimaev and A. M. Myzdrikov,ibid (1975)1 15.Google Scholar
  206. [205]
    N. I. Ivanov, V. P. Rassakazov and F. V. Sedykin, Sedykin,Fiz. i. Khim. Obrabot. Mat. 1 (1969) 38.Google Scholar
  207. [206]
    G. V. Chaika,Elektronnaya Obrabot. Mat. 6 (1970) 23.Google Scholar
  208. [207]
    L. M. Kovalev,Vestnik. Mashinostroeniya 54 (1974) (4) 77.Google Scholar
  209. [208]
    T. M. Mercer,Metal Progr. 97 (1970) 136.Google Scholar
  210. [209]
    Brit. Pats. 1301189, 1115409, 1004009, 1239963.Google Scholar
  211. [210]
    N. G. Kharlan, A. A. Mamakov, A. N. Yagubets and V. V. Karyakin,Elektronnaya Obrabot. Mat. 5 (1969) 47.Google Scholar
  212. [211]
    Brit. Pat. 970436.Google Scholar
  213. [212]
    W. Mauz,VDI (Ber.)240 (1975) 51.Google Scholar
  214. [213]
    Brit. Pat. 1252691.Google Scholar
  215. [214]
    S. Ito, K. Honda and F. Sakurai,J. Mech. Lab. (Japan)11 (1965) 67.Google Scholar
  216. [215]
    Yu. N. Petrov and G. L. Mochalova,Elektronnaya Obrabot. Mat. 1 (1968) 15.Google Scholar
  217. [216]
    V. V. Parshutin and G. N. Zaidman,ibid 18 Part 4 (1966) 26.Google Scholar
  218. [217]
    G. L. Mochalova,Fiz. i. Khim. Obrabot. Mat. 1 (1970) 52.Google Scholar
  219. [218]
    Idem, Fiz.-Khim. Mekhan. Mat.6 (1970) 101.Google Scholar
  220. [219]
    A. B. Dmitriev, A. A. Eliseev, N. N. Kharitonov and N. V. Romanov,Elektronnaya Obrabot. Mat. 3 (1972) 8.Google Scholar
  221. [220]
    L. M. Voronenko and I. I. Moroz,ibid 1 (1970) 25.Google Scholar
  222. [221]
    L. M. Voronenko, A. D. Davydov and V. D. Kashcheev,Fiz. i. Khim. Obrabot. Mat. 5 (1972) 133.Google Scholar
  223. [222]
    G. Pahlitzsch, and E. Dreesmann,Z. Wirt. Fertigung 68 (1913) 409.Google Scholar
  224. [223]
    G. L. Mochalova,Elektronnaya Obrabot. Mat. 5 (1969) 34.Google Scholar
  225. [224]
    J. P. Hoare, A. J. Chartrand and M. A. Laboda,J. Electrochem. Soc. 120 (1973) 1071.Google Scholar
  226. [225]
    K. Mirumachi and K. Hijikata,J. Jap. Soc. Powder Met. 18 (1972) 18.Google Scholar
  227. [226]
    V. V. Parshutin, Yu. N. Petrov and A. I. Loskutov,Elektronnaya Obrabot. Mat. 3 (1970) 15.Google Scholar
  228. [227]
    Yu. Petrov and V. V. Parshutin,ibid 4 (1972) 22.Google Scholar
  229. [228]
    O. P. Gamov,ibid 3 (1973) 18.Google Scholar
  230. [229]
    H. Reinhart and W. Grünwald,Werkstoff u. Betrieb. 95 (1962) 212.Google Scholar
  231. [230]
    ‘Electrochemical treatment of metals’, Kishinev, Izdatel'stvo Shtiintsa (1971).Google Scholar
  232. [231]
    J. F. Kahles,Tool Prod. 36 (1970) 61.Google Scholar
  233. [232]
    J. F. Kahles and M. Field, SME Tech. paper IQ 71-240.Google Scholar
  234. [233]
    G. Bellows, ASTME, Tech. Paper MR68-518 (1968).Google Scholar
  235. [234]
    G. Bellows,Tool Manufac. Eng. 61 (1968) (3) 66.Google Scholar
  236. [235]
    J. Frisch and R. R. Cole, ASME Paper 61-WA-94 (1961) andEng. Ind. 84 (1962) 483.Google Scholar
  237. [236]
    R. C. Movich, ASTME, Tech. Paper MR69-110 (1969).Google Scholar
  238. [237]
    M. Field, J. F. Kahles and W. P. Koster,ibid MR67-142 (1967).Google Scholar
  239. [238]
    J. M. Evans, P. J. Boden and A. A. Baker, ‘Proc. 12th Int. Machine Tool Design and Research Conference’, Macmillan, London (1972).Google Scholar
  240. [239]
    J. A. Gurklis, ASTME Tech. Paper EM66-166 (1966).Google Scholar
  241. [240]
    H. Heitmann,Ind. Anz. 89 (1967) (23) 25.Google Scholar
  242. [241]
    E. N. Kanin, V. P. Batrakov, V. S. Poroikova and T. N. Smirnova,Elektrkhim. Polirovanie Met. (1974) 30.Google Scholar
  243. [242]
    M. Field, W. P. Koster and J. F. Kahles,Int. Conf. Manf. Technol. (1967) 1319.Google Scholar
  244. [243]
    H. Wiegand and H. Speckhardt,Metalloberfläche 20 (1966) 2.Google Scholar
  245. [244]
    S. V. Ventsel and B. V. Indin,Elektronnaya Obrabot. Mat. 3 (1975) 18.Google Scholar
  246. [245]
    G. Rowden,Metallurgia 77 (1968) 189.Google Scholar
  247. [246]
    J. R. Stephens,NASA Tech. note D304 (August 1964).Google Scholar
  248. [247]
    K. Sedlatschek and D. A. Thomas,Powder Met. Bull. 8 (1957) (1–2) 35.Google Scholar
  249. [248]
    A. Fourdeaux and A. Wronski,Brit. J. Appl. Physics 14 (1963) 218.Google Scholar
  250. [249]
    W. A. Ward, M. L. Jacobson and C. O. Matthews,Trans. A.S.M. 54 (1961) 84.Google Scholar
  251. [250]
    G. P. Zlobin and A. B. Platov,Elektronnaya Obrabot. Mat. 1 (1968) 3.Google Scholar
  252. [251]
    H. W. Bredin,Machinery 66 (1960) (11) 113.Google Scholar
  253. [252]
    R. Mondon,Met. Prog. 83 (1963) 95.Google Scholar
  254. [253]
    G. K. Gorobets, A. D. Kornev, N. F. Kuz'min and N. I. Ogurtsev,Fiz. i. Khim. Obrabot. Mat. 1 (1971) 38.Google Scholar
  255. [254]
    A. I. Isaev, G. V. Kargin and P. P. Kryuchkov,Veshnik Mashinostroenya 3 (1975) 77.Google Scholar
  256. [255]
    F. B. Fuller,Met. Prog. 56 (1949) 348.Google Scholar
  257. [256]
    H. H. Hanink,Prod. Engineering 22 (1951) 164.Google Scholar
  258. [257]
    G. Bellows and R. M. Niemi, SME Tech. Paper IQ71-239 (1971).Google Scholar
  259. [258]
    A. M. Egorov and I. A. Kostromin,Elektronnaya Obrabot. Mat. 1 (1975) 85.Google Scholar
  260. [259]
    L. M. Shcherbakov,Fiz. i. Khim. Obrabot. Mat. 5 (1968) 36.Google Scholar
  261. [260]
    B. P. Saushkin,Elektronnaya Obrabot. Mat. 5 (1973) 11.Google Scholar
  262. [261]
    V. P. Kiselev,ibid 4 (1971) 9.Google Scholar
  263. [262]
    C. L. Faust,Trans. Int. Metal Finishing 41 (1964) 1.Google Scholar
  264. [263]
    M. Minca,Const. Masini 26 (1974) 85.Google Scholar
  265. [264]
    W. Forke, and L. Franke,Technik 23 (1968) 19.Google Scholar
  266. [265]
    Yu. N. Petrov, I. N. Verkhovetski and G. N. Zaidman,Elektronnaya Obrabot Mat. 5 (1970) 3.Google Scholar
  267. [266]
    N. D. Pronichev and V. A. Shmanov,ibid 1 (1975) 19.Google Scholar
  268. [267]
    M. A. Laboda and J. P. Hoare,J. Electrochem. Soc. 122 (1975) 1489.Google Scholar
  269. [268]
    A. L. Krylov, V. G. Shuster and R. D. Eidelman,Elektronnaya Obrabot. Mat. 3 (1969) 21.Google Scholar
  270. [269]
    A. L. Krylov and N. I. Gavrilenko,ibid 6 (1972) 13.Google Scholar
  271. [270]
    J. M. FitzGerald and J. A. McGeough,J. Inst. Maths Appl. 5 (1969) 387.Google Scholar
  272. [271]
    J. M. FitzGerald, J. A. McGeough and L. M. Marsh,ibid 5 (1969) 409.Google Scholar
  273. [272]
    Yu. B. Zakharov and L. M. Shcherbakov,Fiz. i. Khim. Obrabot. Mat. 5 (1968) 59.Google Scholar
  274. [273]
    S. Ito, K. Chikamori and F. Sakurai,J. Mech. Lab. (Tokyo)20 (1966) (1) 1.Google Scholar
  275. [274]
    G. N. Korchagin, I. K. Mingazetinov and V. A. Petrov,Elektronnaya Obrabot. Mat. 4 (1972) 3.Google Scholar
  276. [275]
    V. A. Arantsev and Yu. N. Petrov,ibid 1 (1973) 83.Google Scholar
  277. [276]
    W. H. Stoll, J. Puhr-Westerheide and R. Scharwachter, IEE Pub. 133 (1975) 169.Google Scholar
  278. [277]
    V. A. Arantsev,Elektronnaya Obrabot. Mat. 5 (1975) 88.Google Scholar
  279. [278]
    G. K. Vandenburgh, ASTME, Tech. Paper MR68412 (1968).Google Scholar
  280. [279]
    L. A. Williams,Mod. Machine Shop 41 (1969) 129.Google Scholar
  281. [280]
    J. W. Throop, ASTME, Tech. Paper MR 67-709 (1967).Google Scholar
  282. [281]
    D. Ya. Dlugach, E. I. Slepushkin and V. M. Shchitova,Elektronnaya Obrabot. Mat. 2 (1968) 17.Google Scholar
  283. [282]
    H. Tipton, ‘Proc. 5th Int. Mach. Tool Design and Res. Conf’., Birmingham. Pergamon Press, Oxford (1964).Google Scholar
  284. [283]
    G. N. Zaidman, V. V. Parshutin and Yu. N. Petrov,Fiz. i. Khim. Obrabot. Mat. 1 (1970) 42.Google Scholar
  285. [284]
    H. Dietz, K. G. Gunther and K. Otto,Mech. Mat. Electr. 304/5 (1975) 22.Google Scholar
  286. [286]
    G. N. Korchagin, I. K. Mingazetinov, V. A. Petrov and L. A. Semakov,Elektronnaya Obrabot. Mat. 1 (1973) 9.Google Scholar
  287. [287]
    G. N. Korchagin and V. A. Makarov,ibid 3 (1974) 21.Google Scholar
  288. [288]
    J. Hopenfeld and R. R. Cole,J. Eng. Ind. 91, (1969) 755.Google Scholar
  289. [289]
    F. Feuillebois,Mec. Mat. Electr. 304/5 (1975) 27.Google Scholar
  290. [290]
    R. Ippolito,CIRP Ann. 24 (1975) 115.Google Scholar
  291. [291]
    J. F. Thorpe and R. D. Zerkle,Int. J. Mach. Tool Design and Res. 9 (1969) 131.Google Scholar
  292. [292]
    J. F. Thorpe, ASTME, Tech. Paper MR70-513 (1970).Google Scholar
  293. [293]
    H. Tipton,Machinery (London)112 (1968) 325.Google Scholar
  294. [294]
    A. G. Degtyarenko,Elektronnaya Obrabot. Mat. 6 (1968) 19.Google Scholar
  295. [295]
    G. A. Alekseev, Yu. S. Volkov and I. I. Moroz,Stanki i. Instrument 39 Part 6 (1968) 11.Google Scholar
  296. [296]
    H. Geisel,Werkstatt u. Betrieb 102 (1969) 91.Google Scholar
  297. [297]
    H. Heitmann and D. Pahl,Ind. Anz. 88 (1966) 1509.Google Scholar
  298. [298]
    K. Kawafune, T. Mikoshiba and K. Noto,CIRP Ann. 16 (1968) 345.Google Scholar
  299. [299]
    H. Tipton, In reference 23‘.Google Scholar
  300. [300]
    H. Tipton,IEE Conf. Electr. Methods of Mach. and Form. London (1967).Google Scholar
  301. [301]
    L. B. Dmitriev, V. V. Lyubimov, V. G. Shlyakov, V. P. Garin and V. D. Strukov,Tekhnol. Mashinostroenya, Tula21 (1971) 87.Google Scholar
  302. [302]
    L. N. Goldfarb,Elektronnaya Obrabot. Mat. 2 (1974) 79.Google Scholar
  303. [303]
    V. A. Arantsev,ibid 3 (1972) 88.Google Scholar
  304. [304]
    J. Molloy,Machinery (London)107 (1965) 1027.Google Scholar
  305. [305]
    S. C. Ratmansky, ASTME, Tech. Paper MR67-311 (1967).Google Scholar
  306. [306]
    Brit. Pat. 1129268.Google Scholar
  307. [307]
    N. Shikata and S. Ito,J. Mech. Eng. Lab. (Tokyo)28 (1974) 8.Google Scholar
  308. [308]
    A. M. Cherevatski, A. G. Farrakhov and V. G. Kozin,Vestnik Machinostroyenya 2 (1975) 81.Google Scholar
  309. [309]
    G. S. Shmakov and B. P. Yurchenko,Elektronnaya Obrabot. Mat. 1 (1971) 7.Google Scholar
  310. [310]
    K. Brinsmead and G. Yuraski, SME Tech, Paper CM70-812 (1970).Google Scholar
  311. [311]
    C. N. Larsson and E. M. Baxter,IEE Conf. Pub. 133 (Nov. 1975) 161.Google Scholar
  312. [312]
    Brit. Pat. 1103486.Google Scholar
  313. [313]
    Brit. Pat. 1353327.Google Scholar
  314. [314]
    Brit. Pat. 1250902.Google Scholar
  315. [315]
    Brit. Pats. 933731, 969957.Google Scholar
  316. [316]
    Brit. Pats. 998739, 1228053.Google Scholar
  317. [317]
    Brit. Pats. 1136024, 1309491.Google Scholar
  318. [318]
    Brit. Pat. 1255930.Google Scholar
  319. [319]
    Brit. Pat. 1318826 and V. V. Zenin, V. P. Kondratev, Vu. M. Vodyanov and F. N. Ryzhkov,Elektronnaya Obrabot. Mat. 5 (1975) 85.Google Scholar
  320. [320]
    Brit. Pat. 1169042.Google Scholar
  321. [321]
    Brit. Pat. 1141022.Google Scholar
  322. [322]
    Brit. Pat. 1219957.Google Scholar
  323. [323]
    Brit. Pat. 1238944.Google Scholar
  324. [324]
    Brit. Pat. 1310702.Google Scholar
  325. [325]
    Brit. Pat. 1321077.Google Scholar
  326. [326]
    Brit. Pat. 1310701.Google Scholar
  327. [327]
    J. W. Cuthbertson and T. S. Turner,Production Engineer 45 (1966) 270.CrossRefGoogle Scholar
  328. [328]
    S. P. Loutrel and N. H. Cook, ASME Publications No. 2 (1973).Google Scholar
  329. [329]
    S. K. Sorkhel, P. Mishra and B. Sur,Trans. Soc. Advancement Electroch. Sci and Techn. 8 (1973) 154.Google Scholar
  330. [330]
    V. V. Gutikov, V. V. Klokov and V. P. Smolentsev.Fiz. i. Khim. Obrabot. Mat. 1 (1971) 31.Google Scholar
  331. [331]
    J. F. Thorpe and R. D. Zerkle, ‘Fundamentals of ECM’, Electrochem. Soc. (1971).Google Scholar
  332. [332]
    R. D. Zerkle and J. F. Thorpe, ASTME Tech. Paper MR72-537 (1972).Google Scholar
  333. [333]
    G. L. Baldwin, D. C. Brown and J. L. Gulati,Engineer 225 (1968) 307.Google Scholar
  334. [334]
    K. Schekulin,T. Z. Prak. Metallbearbeitung 60 (1966) 22.Google Scholar
  335. [335]
    G. Bellows, ASTME Tech. Paper MR67-710 (1967).Google Scholar
  336. [336]
    Anon,Iron Age Metalworking Int. 7 (1968) (2) 42.Google Scholar
  337. [337]
    Anon,Am. Mach. Metalworking Manuf. 111 (1967) (22) 149.Google Scholar
  338. [338]
    Anon,Iron Age 199 (1967) (16) 62.Google Scholar
  339. [339]
    H. J. Humbs,VDI (Ber.)240 (1975) 13.Google Scholar
  340. [340]
    J. A. Cross, ASTME Tech. Paper MR73-228 (1973).Google Scholar
  341. [341]
    S. C. Ratmansky,ibid MR69-135 (1969).Google Scholar
  342. [342]
    H. J. Billing and P. Lawrence,ibid MR73-230 (1973).Google Scholar
  343. [343]
    C. R. Allison,ibid MR70-554 (1970).Google Scholar
  344. [344]
    E. J. Krabacher,Metalworking 22 (1966) (4) 44.Google Scholar
  345. [345]
    A. H. Meleka in reference 23 ‘.Google Scholar
  346. [346]
    PERA Report 234 (May 1971) reviewed in Engineering Tech. File No. 9 (Sept. 1974).Google Scholar
  347. [347]
    F. A. Pitschke,S.A.E. Journal 10 (1962) 53.Google Scholar
  348. [348]
    M. Kronenberg,T.Z. Prak. Metallbearbeitung 59 (1965) 282.Google Scholar
  349. [349]
    Anon,Can. Mech. Metalworking 79 (1968) 137.Google Scholar
  350. [350]
    Anon,Metalworking 16 (Dec. 1960) 17.Google Scholar
  351. [351]
    Anon,Aircraft Production 23 (Feb. 1961) 68.Google Scholar
  352. [352]
    Anon,Production Equipment 39 (1962) (2) 4, 8, 36.Google Scholar
  353. [353]
    H. Kubeth,Werkstatt u. Betrieb. 104 (1971) 178.Google Scholar
  354. [354]
    D. A. Glew, SME Paper No. MR73-162 (1973).Google Scholar
  355. [355]
    C. Jackson and R. D. Olson,Tool Manuf. Eng. 63 (1969) (3) 44.Google Scholar
  356. [356]
    C. Jackson,Metal Progr. 97 (1970) (3) 106, 108, 110.Google Scholar
  357. [357]
    A. Uhlir,Rev. Sci. Instr. 26 (1955) 965.Google Scholar
  358. [358]
    Brit. Pats. 1147952, 1159092, 1159115, 1162648, 1208856, 1222943, 1240757.Google Scholar
  359. [359]
    Anon,Steel 160 (1967) 49.Google Scholar
  360. [360]
    P. M. Kelly and J. Nutting,Iron and Steel Inst. J. 192 (1959) 246.Google Scholar
  361. [361]
    Brit. Pat. Application No. P47905 and Brit. Pat. 1339544.Google Scholar
  362. [362]
    S. Gardner, D. Molloy and K. G. Payne,IEE Conf. Pub. 133 (1975) 176.Google Scholar
  363. [363]
    J. W. M. Van den Brekel,Metallinstuut T.N.O. 172 (Feb. 1969) 12.Google Scholar
  364. [364]
    L. A. Williams,Machine Moderne 57 (1963) 26.Google Scholar
  365. [365]
    H. Kubeth,Ind. Anz. 86 (1964) 1661.Google Scholar
  366. [366]
    W. B. Kleiner, ASTME, Tech. Paper SP63-40 (1963).Google Scholar
  367. [367]
    M. Metzger,Rev. Sci. Instr. 29 (1958) 620.Google Scholar
  368. [368]
    Brit. Pat. 1419992.Google Scholar
  369. [369]
    W. J. M. Tegart, ‘Electrolytic and chemical polishing of metals in Research and Industry’, Pergamon, New York (1959).Google Scholar
  370. [370]
    J. L. Jamieson and L. A. Holmes,Tool and Manuf. Eng. 51 (1963) 105.Google Scholar
  371. [371]
    Brit. Pats. 1147393, 1229043 and 1368422.Google Scholar
  372. [372]
    Brit. Pats. 1091157, 1110131, 1169234, 1200089, 1224226,Google Scholar
  373. [373]
    F. E. Cook, H. S. Preiser and J. F. Mills,J. Am. Soc. Naval Eng. 66 (1954) 1005.Google Scholar
  374. [374]
    Brit. Pats. 1172135, 1196395.Google Scholar
  375. [375]
    Brit. Pats. 1032293, 1032734, 1243937.Google Scholar
  376. [376]
    M. Kubota,Mec. Mat. Electr. 303 (1975) 15.Google Scholar
  377. [377]
    H. Opitz, H. Heitmann and U. Becker-Barbrock,CIRP Ann. 15 (1967) 263.Google Scholar
  378. [378]
    R. R. Cole,J. Eng. Ind. 83B (May 1961) 194.Google Scholar
  379. [379]
    E. Ya. Grodzinsky, M. V. Kozlov and A. D. Davydov,Elektronnaya Obrabot. Mat. 6 (1974) 82.Google Scholar
  380. [380]
    F. Huges and A. Notter,Mach. Shop. Eng. Manuf. 28 (1967) 218.Google Scholar
  381. [381]
    A. Geddam and C. F. Noble,IEE Conf. Pub. 133 (Nov. 1975) 249.Google Scholar
  382. [382]
    M. A. Manolov,Mec. Mat. Electr. 304/5 (1975) 11.Google Scholar
  383. [383]
    R. M. Latanison, K. C. Nielson and R. Kirschbaum,Mod. Mach. Shop. 46 (1974) (9) 69.Google Scholar
  384. [384]
    Brit. Pats. 1064995, 1338221, 1346174.Google Scholar
  385. [385]
    K. Iliev,CIRP Ann. 24 (1975) 141, and L. Kops,Proceedings, 3rd Int. North American Metalworking Research Conf. (1975).Google Scholar
  386. [386]
    C. F. Noble,IEE Conf. Pub. 133 (Nov. 1975) 181.Google Scholar
  387. [387]
    E. A. Randlett and M. P. Ellis, ASTME, Tech. Paper MR67-648 (1967).Google Scholar
  388. [388]
    G. K. Vandenburgh,ibid MR66-167 (1966).Google Scholar
  389. [389]
    L. A. Williams,ibid MR66-213 (1966).Google Scholar
  390. [390]
    C. L. Faust, J. A. Gurklis and J. A. Cross,Int. Conf. Manuf. Technol. (1967) 341.Google Scholar
  391. [391]
    E. E. Weismantel and R. H. Kuhn, ASTME, Tech. Paper MR68-206 (1968).Google Scholar
  392. [392]
    S. Sheff,Electrochem. Technol. 5 (1967) 47.Google Scholar
  393. [393]
    A. V. Margules,Zavod. Lab. 37 (1971) 471.Google Scholar
  394. [394]
    R. F. Pawel and T. S. Mundy,J. Electrochem. Soc. 115 (1968) 233.Google Scholar
  395. [395]
    D. White, C. H. Johnson and S. Leber,Prakt. Metallographie 6 (1969) 48.Google Scholar
  396. [396]
    Anon,Aircraft Engineering 33 (Feb. 1961) 46.Google Scholar
  397. [397]
    A. K. Karimov, A. A. Abrosimov and S. A. Burchakov,Elektronnaya Obrabot. Mat. 6 (1974) 84.Google Scholar
  398. [389]
    V. V. Parshutin, M. G. Govberg and A. I. Loskutov,ibid 5 (1974) 89.Google Scholar
  399. [399]
    E. M. Grala, ASTME, Tech. Paper MR67-642 (1967).Google Scholar
  400. [400]
    J. A. Gurklis,Cobalt 39 (1968) 81.Google Scholar
  401. [401]
    L. W. Collins,Machinery (US)72 (1965) 171.Google Scholar
  402. [402]
    J. B. Darling, ASTME, Tech. Paper MR68-208 (1968).Google Scholar
  403. [403]
    D. Fishlock and K. W. Hards, ‘New ways of working metals’ Newnes, London (1965) pp. 65–82.Google Scholar
  404. [404]
    O. I. Egorova, A. P. Ivanov, R. I. Poluden and M. A. Tolstaya,Fiz. i. Khim. Obrabot. Mat. 4 (1969) 145.Google Scholar
  405. [405]
    R. C. Movich, ASTME, Tech. Paper MR68-207 (1968).Google Scholar
  406. [406]
    Idem, ibid MR69-711 (1969).Google Scholar
  407. [407]
    Brit. Pat. 1211290.Google Scholar
  408. [408]
    J. Molloy,Machinery (London)107 (1965) 1198.Google Scholar
  409. [409]
    A. S. Bairamyan,Elektronnaya Obrabot. Mat. 3 (1974) 87.Google Scholar
  410. [410]
    J. A. Cross, ASTME, Tech. Paper MR72-536 (1972).Google Scholar
  411. [411]
    J. Molinelli, G. J. Michaels and G. Owens,ibid MR67-647 (1967).Google Scholar
  412. [412]
    J. A. Cross,ibid MR67-234 (1967).Google Scholar
  413. [413]
    E. Morris, SME Tech. Paper MR75-477 (1975).Google Scholar
  414. [414]
    V. P. Olenchich, M. A. Sokolov and V. S. Petrusenko,Stanki i Instr. 7 (1975) 39.Google Scholar
  415. [415]
    Brit. Pats. 1135023, 1144739, 1153015.Google Scholar
  416. [416]
    J. Summer,Engineer 231 (1970) 32.Google Scholar
  417. [417]
    B. A. Medvedev and V. P. Smolentsev,Elektronnaya Obrabot. Mat. 4 (1974) 13.Google Scholar
  418. [418]
    Brit. Pat. 1217410.Google Scholar
  419. [419]
    D. T. Vasilev and L. D. Ponomarov,Elektronnaya Obrabot. Mat. 3 (1970) 20.Google Scholar
  420. [420]
    V. M. Mordekhai,Stanki. i. Instrument 39 (1968) (8) 21.Google Scholar
  421. [421]
    Anon,Machinery (N.Y.)66 (Dec. 1959) 182.Google Scholar
  422. [422]
    Anon,Steel 149 (Oct. 1962) 71.Google Scholar
  423. [423]
    W. Grant,Technica 13 (1964) 1116.Google Scholar
  424. [424]
    Anon,Am. Machinist/Metalworking Manuf. 112 (1968) (13) 110.Google Scholar
  425. [425]
    Brit. Pat. 1226033.Google Scholar
  426. [426]
    B. N. Berezkhov, V. A. Golovachev, V. A. Shmanov and Yu. A. Sirazh,Elektronnaya Obrabot Mat. 3 (1969) 34.Google Scholar
  427. [427]
    Brit. Pats. 943101, 1315059.Google Scholar
  428. [428]
    F. V. Sedykin and L. B. Dmitriev,Techn. Machinostroyenia, Tula22 (1972) 24.Google Scholar
  429. [429]
    L. A. Williams,Mach. Moderne 709 (April 1968) 67.Google Scholar
  430. [430]
    Brit. Pats. 1109720, 1143932, 1180159, 1251182, 1254587, 1280496.Google Scholar
  431. [431]
    Brit. Pats. 939402, 1353562 and E. S. Stepanov,Elektronnaya Obrabot. Mat. 6 (1968) 14.Google Scholar
  432. [432]
    Anon,Iron Age 193 (1964) (7) 90.Google Scholar
  433. [433]
    V. Buickaens and I. Paganini,Rev. Sci. Instr. 42 (1971) 1687.Google Scholar
  434. [434]
    Brit. Pats. 1028247, 1065485, 1066197.Google Scholar
  435. [435]
    A. P. Zakonov and G. N. Korchagin,Elektronnaya Obrabot. Mat. 6 (1973) 30.Google Scholar
  436. [436]
    Brti. Pats. 991454, 1046471, 1195669.Google Scholar
  437. [437]
    L. A. Williams, SME Paper SP63-44 (1963).Google Scholar
  438. [438]
    R. A. Wilson,Iron Age 214 (1974) (25) 45.Google Scholar

Copyright information

© Chapman and Hall Ltd 1977

Authors and Affiliations

  • J. Bannard
    • 1
  1. 1.Department of Metallurgy and Materials ScienceUniversity of NottinghamUK

Personalised recommendations