Abstract
Sintered plate Cd electrodes have been studied in alkaline solutions using potentiostatic and galvanostatic techniques. The behaviour is, in many ways, similar to that of a flat Cd electrode. A pseudo steady-state current is found due to the dissolution of Cd as Cd(OH)2−4. At more anodic potentials passivation occurs due to the solid state formation of Cd(OH)2. This model can account for the results obtained on galvanostatic discharge.
Similar content being viewed by others
References
R. D. Armstrong and G. D. West,J. Electroanal. Chem.,30 (1971) 385.
R. D. Armstrong, J. D. Milewski, W. P. Race and H. R. Thirsk,J. Electroanal. Chem.,21 (1969) 517.
Y. Okinaka,J. Electrochem. Soc.,117, (1970) 289.
J. L. Weininger and M. W. Breiter, “Power Sources 1966” (Ed. D. H. Collins), Pergamon Press, p. 269 (1967).
P. E. Lake and J. M. Goodings,Canad. J. Chem.,36 (1958) 1089.
P. C. Milner and U. B. Thomas, in ‘Advances in Electrochemistry and Electrochemical Engineering’, Vol. 5 (Ed. C. W. Tobias), Interscience, New York, p. 1 (1967).
D. Dryssen and P. Lumme,Acta. Chem. Scand.,16 (1962) 1785.
D. E. Ryan, J. R. Dean and R. M. Cassidy,Canad. J. Chem.,43 (1965) 999.
R. E. Visco and R. M. Sonner,Extended Abstracts, Battery Division of Electrochemical Society, Fall Meeting, 1969, p. 18.
M. A. V. Devanathan and S. Lakshmanan,Electrochim. Acta,13 (1968) 667.
M. Fleischmann, K. S. Rajagopalan and H. R. Thirsk,Trans. Faraday. Soc.,59 (1963) 741.
R. D. Armstrong,J. Electroanal. Chem.,28 (1970) 221.
J. E. Dunning and D. N. Bennion,Proceedings of Advances in Battery Technology Symposium December 5, 1969, Vol. 5, p. 135.
E. A. Grens,Electrochim. Acta,15 (1970) 1047.
J. S. Newman and C. W. Tobias,J. Electrochem. Soc.,109 (1962) 1183.
R. C. Alkire, E. A. Grens and C. W. Tobias,J. Electrochem. Soc.,116 (1969) 1183.
S. U. Falk,J. Electrochem. Soc.,107 (1960) 661.
J. P. Harivel, B. Morignat and J. Migeon, ‘Batteries’2 (Ed. D. H. Collins), Pergamon Press, p. 107 (1965).
A. J. Salkind, H. J. Canning and M. L. Block,J. Electrochem. Soc.,2 (1964) 254.
P. Bro and H. Y. Kang,J. Electrochem. Soc.,118 (1971) 519.
E. J. Casey and J. B. Vergette,Electrochim. Acta.,14 (1969) 897.
A. Fleischer,J. Electrochem. Soc.,94 (1948) 289.
L. Horn,Chem.-Ing.-Techn.,38 (1966) 660.
J. C. Duddy and A. J. Salkind,J. Electrochem. Soc.,108 (1961) 717.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Armstrong, R.D., Sperrin, A.D., Tye, F.L. et al. The mechanism of discharge of sintered plate cadmium electrodes. J Appl Electrochem 2, 265–273 (1972). https://doi.org/10.1007/BF00615273
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00615273