Mechanics of Composite Materials

, Volume 28, Issue 1, pp 53–58 | Cite as

Comparison of interply shear strength of composites determined by several traditional test methods

  • V. I. Zhigun


Shear Strength Traditional Test Traditional Test Method Interply Shear 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    Yu. M. Tarnopol'skii and T. Ya. Kintsis, Methods of Static Test of Reinforced Plastics [in Russian], Moscow (1981).Google Scholar
  2. 2.
    I. G. Zhigun, “Analysis of the method of determining the interply shear strength of composite materials,” Mekh. Polim. No. 4, 640–648 (1976).Google Scholar
  3. 3.
    U. Masuji, “Problems in mechanical testing methods of advanced composite materials,” in: Proc. 10th Isukuba General Symp. (2nd Japan-France Seminar on Composite Materials), Vol. 2, No. 2–3, 44–54 (1990).Google Scholar
  4. 4.
    M. L. Smirnova (ed.), Strength of a Vessel Hull Made of Glass Plastic [in Russian], Leningrad (1965)Google Scholar
  5. 5.
    V. P. Nikolaev, V. B. Popov, and A. K. Sborovskii, Strength and Reliability of Wound Glass Plastic [in Russian], Leningrad (1983).Google Scholar
  6. 6.
    V. I. Zhigun, “Experimental evaluation of low-carrying capacity of composites with a circular hole in combined loading in interply shear and transfers compression,” Mekh. Kompozitn. Mater., No. 1, 69–73, (1991).Google Scholar
  7. 7.
    P. Dadkas and J. S. McDowell, “Analytical and experimental evaluation of double-notch shear specimens of orthotropic materials,” Exper. Mech., No. 184–189, June (1990).Google Scholar
  8. 8.
    E. S. Tsarakhov, Design of Joints in Elements of Aviation Systems Made of Composite Materials [in Russian], Moscow (1980).Google Scholar
  9. 9.
    A. V. Andreev, Engineering Methods of Determining Stress Concentration in Machine Components [in Russian], Moscow (1976).Google Scholar
  10. 10.
    K. Chamiz (ed.), Composite Materials. Vol. 8. Analysis and Design of Structure [Russian translation], Part 2, Moscow (1978).Google Scholar
  11. 11.
    Yu. M. Tarnopol'skii, I. G. Zhigun, and V. A. Polyakov, “Analysis of distribution of tangential stresses in three-point bending composite beams,” Mekh. Polim., No. 1, 56–62 (1977).Google Scholar

Copyright information

© Plenum Publishing Corporation 1992

Authors and Affiliations

  • V. I. Zhigun
    • 1
  1. 1.Institute of Polymer MechanicsLatvian Academy of SciencesRiga

Personalised recommendations