Abstract
A simple method for adjusting light coupling between two waveguides is presented. The method involves trimming the interaction length by loading a metal film on to one of the coupled-waveguides. It is effective only for the TM mode, and trimming can be achieved very simply. The operational principle is experimentally examined using an optical directional coupler fabricated inc-plate LiNbO3.
Similar content being viewed by others
References
M. Paupchon, Y. Combemale, X. Mathieu, D. B. Ostrowsky, L. Reiber, A. M. Roy, B. Sejorne andM. Werner,Appl. Phys. Lett. 27 (1975) 298–91.
R. V. Schmidt andP. S. Cross,Opt. Lett. 2 (1978) 45–7.
O. Mikami, J. Noda andM. Fukuma,Trans. IECE. Japan E-61 (1978) 144–7.
K. Tada andK. Hirose,Appl. Phys. Lett. 25 (1974) 561–2.
F. J. Leonberger andC. O. Bozler,ibid 31 (1977) 223–6.
J. C. Shelton, F. K. Reinhart andR. A. Logan,IEEE Trans. Electron Devices ED-24 (1977) 1198.
V. Ramaswany, M. D. Divino andR. D. Standley,Appl. Phys. Lett. 32 (1978) 644–6.
O. Mikami andS. Zembutsu,ibid 35 (1979) 145–7.
M. Minakata,ibid 35 (1979) 40–2.
H. Kogelnik andR. V. Schmidt,IEEE J. Quant. Elect. QE-12 (1976) 396–401.
R. V. Schmidt andH. Kogelnik,Appl. Phys. Lett. 28 (1976) 503–6.
O. Mikami andS. Zembutsu,ibid 35 (1979) 38–40.
O. Mikami, J. Noda, S. Zembutsu andS. Fukunishi,ibid 31 (1977) 376–8.
I. P. Kaminow, W. L. Mammel andH. P. Weber,Appl. Opt. 13 (1974) 396–405.
A. Reisinger,ibid 12 (1973) 1015–25.
Y. Yamamoto, T. Kamiya andH. Yanai,ibid 14 (1975) 322–6.
S. E. Miller,Bell Syst. Tech. J. 33 (1954) 661–719.
Y. Suematsu, M. Hakuta, K. Furuya, K. Chiba andR. Hasumi,Appl. Phys. Lett. 21 (1972) 291–3.
O. Mikami,ibid 36 (1980) 491–3.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Mikami, O., Noda, J. & Iwasaki, H. Coupling-length trimming by metal loading in optical coupled-waveguides. Opt Quant Electron 13, 141–146 (1981). https://doi.org/10.1007/BF00612746
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00612746