Abstract
For a superplastic 7475 alloy, tensile properties are tested under various conditions in order to investigate the effects of the tensile conditions on the mechanical properties as well as on the microstructure after working. The results obtained here suggest a possibility of high-speed forming of this alloy. Under conditions of 400°C and 8.3×10−2s−1 strain rate, a comparatively large elongation of about 200% can be attained. This may be due to the fact that the fine subgrains arise during the deformation. Also, mechanical properties at room temperature of the specimen prestrained under this condition are found to be fairly satisfactory.
Similar content being viewed by others
References
J. A. Wert, N. E. Paton, C. H. Hamilton and M. W. Mahoney, Met. Trans. 12A (1981) 1267.
N. E. Paton, C. H. Hamilton, J. Wert and M. Mahoney, J. Metals 34 (1982) 21.
C. C. Bampton and J. W. Edington, Met. Trans. 13A (1982) 1721.
Idem., Trans. ASME. J. Engng Mater. Technol. 105 (1983) 55.
M. W. Mahoney, C. H. Hamilton and A. K. Ghosh, Met. Trans. 14A (1983) 1593.
J. Pilling and N. Ridley, Acta Metall. 34 (1986) 669.
Y. Kobayashi, H. Goto and Y. Takeuchi, J. Jpn Inst. Light Metals 36 (1986) 36.
A. Juhász, N. Q. Chinh, P. Tasnádi, I. Kovács and T. Turmezey, J. Mater. Sci. 22 (1987) 137.
Y. Hirose, Y. Miyagi, M. Hino and T. Eto, Aluminium 63 (1987) 386.
Ph. Bompard, J. Y. Lacroix and A. Varloteaux, ibid. 64 (1988) 162.
K. Matsuki, G. Staniek, H. Nakagawa and M. Tokizawa, Z. Metallkde 79 (1988) 231.
Y. Hong, N. Muramatsu and T. Endo, J. Jpn Inst. Light Metals 39 (1989) 541.
C. H. Cáceres and D. S. Wilkinson, Acta Metall. 32 (1984) 415.
R. Horiuchi and M. Otsuka, Trans. Jpn Inst. Metals 13 (1972) 284.
P. Yavari and T. G. Langdon, Acta Metall. 30 (1982) 2181.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Takuda, H., Kikuchi, S. & Hatta, N. Tensile properties of fine-grained 7475 aluminium alloy at various temperatures and strain rates. J Mater Sci 26, 4643–4647 (1991). https://doi.org/10.1007/BF00612400
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF00612400