Advertisement

Mechanics of Composite Materials

, Volume 21, Issue 4, pp 460–466 | Cite as

Analysis of the maximum power in supply and extraction of energy in accelerating and braking chordal flywheels made of composites

  • P. A. Moorlat
  • G. G. Portnov
  • V. I. Romashko
  • A. P. Ryazanov
Article
  • 24 Downloads

Conclusions

  1. 1.

    A method of calculating the state of stress and strain of a chordal flywheel in braking was worked out and experimentally verified.

     
  2. 2.

    A method of analyzing the braking regimes of a flywheel with the aid of the limit curve (b\(\mathop {\text{W}}\limits^ \circ \)M)rd = f(WM) was suggested.

     
  3. 3.

    The dependences of (b\(\mathop {\text{W}}\limits^ \circ \)M)rd on WM and of (b\(\mathop {\text{W}}\limits^ \circ \)V)rd on WV were obtained for two types of chordal flywheel made of composites differing by the material of the rim and of the spokes.

     

Keywords

Maximum Power Limit Curve 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    D. W. Rabenhorst, “The broad range of flywheel application,” in: Proceedings of the 1975 Flywheel Technol. Sympos., California, Nov. (1975), pp. 34–39.Google Scholar
  2. 2.
    N. V. Gulia, Flywheel Motors [in Russian], Moscow (1976),Google Scholar
  3. 3.
    I. A. Glebov, V. V. Vyrvinskii, É. G. Kasharskii, F. G. Rutberg, and M. V. Chesnokova, “Systems of short-term electric current supply by electrical machinery,” in: Sources of Electric Power Supply by Powerful Short-Term and Impulse Loads, Leningrad (1981), pp. 3–17.Google Scholar
  4. 4.
    N. N. Kustov, A. M. Shkatova, I. A. Kustova, and V. I. Goryachkov, “Design and production of inertia accumulators for electrical machinery,” in: Sources of Electric Power Supply by Powerful Short-Term and Impulse Loads, Leningrad (1981), pp. 108–117.Google Scholar
  5. 5.
    P. A. Moorlat and G. G. Portnov, “Calculation of the state of stress and strain of a chordal flywheel with spokes,” Mekh. Kompozitn. Mater., No. 5, 853–862 (1983).Google Scholar
  6. 6.
    S. D. Ponomarev, V. L. Biderman, K. K. Likharev, V. M. Makushin, N. N. Malinin, and V. I. Feodos'ev, Stress Analysis in Engineering [in Russian], Vol. 3, Moscow (1959).Google Scholar
  7. 7.
    V. P. Nikolaev, V. D. Popov, and A. K. Sborovskii, Strength and Reliability of Coiled Glass-Fiber Reinforced Plastics [in Russian], Leningrad (1983).Google Scholar
  8. 8.
    Yu. N. Rabotnov, The Mechanics of Deformed Solids [in Russian], Moscow (1979).Google Scholar
  9. 9.
    V. L. Kulakov and G. G. Portnov, “The effectiveness of ballast in flywheels made of composites,” Mekh. Kompozitn. Mater., No. 2, 291–299 (1980).Google Scholar

Copyright information

© Plenum Publishing Corporation 1986

Authors and Affiliations

  • P. A. Moorlat
    • 1
  • G. G. Portnov
    • 1
  • V. I. Romashko
    • 1
  • A. P. Ryazanov
    • 1
  1. 1.Institute of the Mechanics of PolymersAcademy of Sciences of the Latvian SSRRiga

Personalised recommendations