Mechanics of Composite Materials

, Volume 15, Issue 1, pp 45–51 | Cite as

Dynamics of stress redistribution in a ruptured fiber of a composition material

  • E. N. Sakharova
  • A. S. Ovchinskii
Strength of Materials

Conclusions

  1. 1.

    The dynamic effects contributing to stress redistribution in a ruptured fiber are analyzed on the basis of certain assumptions [1].

     
  2. 2.

    The movement of a ruptured fiber for various stages of shear deformation in the matrix and for a laminated section is described by differential equations in partial derivatives, the solution of which can be obtained by numerical methods.

     
  3. 3.

    Analysis of stress redistribution in a ruptured fiber made it possible to expose, together with unloading waves, reloading waves, which pass over a significant length of fiber and may give rise to its subsequent rupture (breaks).

     
  4. 4.

    Consideration of the dynamics of the rupture process made it possible to define more precisely the stress region in which the rupture of a fiber will lead to delamination, and to estimate the magnitude of the delaminated segment and the distance at which the ends of the ruptured fiber are separated.

     
  5. 5.

    Delamination of a ruptured fiber from the matrix gives rise to a marked increase in the ineffective length of the fiber with high percentages of fiber by volume.

     

Keywords

Differential Equation Partial Derivative Shear Deformation Dynamic Effect Composition Material 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    A. S. Ovchinskii, I. M. Kop'ev, E. N. Sakharova, and V. V. Moskvitin, “atStress redistribution with the rupture of brittle fibers in metallic composition materials” Mekh. Polim., No. 1, 19–29 (1977).Google Scholar
  2. 2.
    A. S. Ovchinskii, S. A. Nemtsova, and I. M. Kop'ev, “atMathematical modeling of failure processes in composite materials reinforced with brittle fibers” Mekh. Polim., No. 5, 800–808 (1976).Google Scholar
  3. 3.
    A. S. Ovchinskii, N. V. Stasenko, and I. M. Kop'ev, “atEffect of scatter of strength characteristics and nonuniformity of placement on failure processes in composite materials” Izv. Vyssh. Uchebn. Zaved., Mashinostroenie, No. 10, 5–8 (1975).Google Scholar
  4. 4.
    E. B. Khait, “atThe dynamics of fiber rupture in a reinforced material” Dokl. Akad. Nauk SSSR,222, No. 3, 572–574 (1975).Google Scholar
  5. 5.
    L. B. Greszczuk, “Theoretical studies of the mechanics of the fiber-matrix interface in composites” in: Interfaces in Composites, York, Pa. (1969), pp. 42–58.Google Scholar
  6. 6.
    L. J. Broutman, “Measurement of the fiber-polymer matrix interfacial strength” in: Interfaces in Composites (1969), pp. 27–41.Google Scholar
  7. 7.
    I. S. Berezin and N. P. Zhudkov, Computational Methods [in Russian], Vol. 2, Moscow (1962), pp. 459–476.Google Scholar
  8. 8.
    W. Pompe, H. G. Schöpf, B. Schultrich, and J. Weissbarth, “Stabilitatvarhalten von faserverstärkten Verbundwerkstoffen Mit Plastischer Matrix” Ann. Phys., Ser. 7,30, Nos. 3/4, 257–271 (1973).Google Scholar
  9. 9.
    I. M. Kop'ev, A. S. Ovchinskii, and W. Pompe, “atEffect of the statistical distribution of the strength of reinforcing fibers on the bearing capacity of a composite material with a metallic plastic matrix” Fiz.-Khim. Mekh. Mater., No. 1, 64–70 (1976).Google Scholar

Copyright information

© Plenum Publishing Corporation 1979

Authors and Affiliations

  • E. N. Sakharova
    • 1
  • A. S. Ovchinskii
    • 1
  1. 1.M. V. Lomonosov Moscow State UniversityUSSR

Personalised recommendations