Mechanoluminiscence in fracture of polyolefins-steel adhesion joints
- 13 Downloads
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Unable to display preview. Download preview PDF.
- 1.L. A. Tyurikova, “Examination of the generation of radiowaves and other phenomena accompanying gas discharge in disruption of adhesive contact of polymers,” Author's Abstract of Candidate's Dissertation, Chemical Sciences, Moscow (1973).Google Scholar
- 2.K. Ohara and T. Hata, “Light emission due to peeling of polymer films from various substrates,” J. Appl. Polym. Sci.,14, No. 8, 2079–2095 (1970).Google Scholar
- 3.U. É. Krauya, Z. T. Upitis, R. B. Rikards, G. A. Teters, and Ya. L. Yansons, “Examination of the process of failure of a glass-fiber plastic by the mechanoluminiscence method,” Mekh. Kompozitn. Mater., No. 2, 325–331 (1981).Google Scholar
- 4.L. Ya. Malers and M. M. Kalnin', “Relationship between the strength of adhesion joints between a polyolefin and steel and the thickness of the superthin film of the polymer remaining on the surface of metal,” Mekh. Polim., No. 3, 420–424 (1976).Google Scholar
- 5.M. M. Kalnin', “Increasing the cohesion strength of boundary layers as a method of increasing the strength of adhesive joints with metals,” in: Synthesis and Physical Chemistry of Polymers [in Russian], No. 23, Kiev (1978), pp. 100–104.Google Scholar
- 6.M. M. Kalnin' and Yu. Ya. Malers, “Correlation of the kinetics of thermal oxidation transformation and variations of adhesion in thermal contact of polyethylene with steel,” in: Modification of Polymer Materials [in Russian], Riga (1981), pp. 24–40.Google Scholar
- 7.Yu. Ya. Malers and M. M. Kalnin', “On the effect of oxygen, combined by the surface of metal, on the nature of chemical adhesion interaction of polyethylene with steel,” Izv. Akad. Nauk Latv. SSR, Ser. Khim., No. 6, 654–660 (1979).Google Scholar
- 8.P. Yu. Butyagin, V. S. Erofeev, I. M. Musaelyan, G. A. Patrikeev, A. N. Streletskii, and A. D. Shulyak, “Luminiscence accompanying mechanical deformation and failure of polymers,” Vysokomol. Soedin., Ser. A, No. 2, 290–299 (1970).Google Scholar
- 9.Yu. Ya. Malers, M. M. Kalnin', and B. O. Labrentse, “Examination of the kinetics of dissolution of iron in polyethylene during thermal contact,” in: Modification of Polymer Materials [in Russian], Riga (1980), pp. 14–22.Google Scholar
- 10.Yu. L. Ozolin'sh and I. M. Matisons, “Problem of the quantitative evaluation of localization of the front of cohesion failure of the adhesive in adhesion joints between a modified polyethylene and metal,” in: Modification of Polymer Materials [in Russian], Riga (1980), pp. 60–67.Google Scholar
© Plenum Publishing Corporation 1984