Zusammenfassung
Se(VI) wird aus 0,1– 6 M Ameisensäurelösung an DEAE-Cellulose stark adsorbiert, Se(IV) dagegen nur geringfügig. Dieser Unterschied gestattet eine wirkungsvolle Trennung an einer kleinen Säule. Die Bestimmung erfolgt in beiden Fällen durch Fällung als Bleiselenat, Auflösung in überschüssiger ÄDTA und Rücktitration mit Mn-Sulfat.
Summary
Se(VI) is adsorbed strongly on DEAE-cellulose from 0.1–6 M formic acid solution, while Se(IV) is adsorbed only slightly from the same media. This favourable difference in adsorption allows an effective separation of Se(IV) and Se(VI) to be achieved on a small column. Determination is performed in both cases by precipitation as lead selenate, dissolution in excess EDTA and back-titration with Mn sulphate solution.
References
Kuroda, R., Oguma, K., Otani, M.: J. Chromatog.96, 223 (1974)
Ueno, K.: Chelometric titration (in Japanese). Tokyo: Nankodo 1972
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Oguma, K., Kuroda, R. Anion-exchange separation of quadri- and sexivalent selenium with DEAE-cellulose in formic acid media. Z. Anal. Chem. 277, 111–112 (1975). https://doi.org/10.1007/BF00602078
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00602078