References
P. Barreau, C. Gerard, J. F. Fries andJ. P. Traverse,Acta Metall. Mater. 38 (1990) 1555.
S. Souquet, C. Gerard andJ. P. Traverse,High Temperatures, High Pressures (to be published).
J. P. Langeron, in “Monographie sur les métaux de haute pureté”, Vol. 2 (Masson, Paris, 1977) p. 548.
U. S. Lindholm,Inst. Phys. Conf. Ser. 21 (1974) 3.
S. Bechet,Techniques de l'ingénieur M2-11 (1986) M565.
C. L. Meyers, G. Y. Onada, A. V. Evy andR. J. Kotfila,Trans. Met. Soc. AIME 233 (1965) 720.
S. Susuki, H. Matsui andH. Kimura,Mater. Sci. Engng 47 (1981) 209.
N. Aritomi,Trans. Nat. Res. Inst. Met. 21 (1979) 18.
M. Kitajima, T. Noda andM. Okada,J. Mater. Sci. Lett. 1 (1982) 223.
L. I. Emel'yanova, V. V. Rybin, Y. V. Solomlo andY. F. Titovets,Sov. Mater. Sci. 19 (1983) 496.
J. Wadworth, C. H. Packer andW. C. Coons, “Physical metallurgy and technology of molybdenum and its alloys 8510-72-0581” (Amax Metals Group Technical Information, Michigan, 1985) p. 13.
A. Kumar andB. L. Eyre,Proc. R. Soc. Lond. A370 (1980) 431.
C. O. Wagner, W. M. Riggs, L. E. Davis, J. F. Mouldor andG. E. Muilenberg, in “Handbook of X-ray photoelectron spectroscopy” (Perkin Elmer, Minnesota, 1979).
K. Hamrin, G. Johansson, A. Fahlman andC. Nordling,J. Phys. Chem. Solids 30 (1969) 1835.
N. Clement, S. Souquet, C. Gerard andJ. P. Traverse,Phys. Status Solidi (a) 141 (1994) 109.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Souquet, S., Gerard, C. & Traverse, J.P. Influence of annealing temperature on the microstructure and mechanical behaviour of sintered or melted molybdenum. J Mater Sci Lett 14, 305–310 (1995). https://doi.org/10.1007/BF00592133
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00592133