References
K. G. K. MURTI and S. SUNDARESAN,Mater. Sei. Technol. 2 (1986) 265.
J. FRITZ and H. STAUDINGER,Prastische Metall. 11 (1974) 197.
F. J. WALLACE, et al. in “Welding handbook”, 7th Edn., Vol. 3, edited by W. H. Kearns (AWS, Miami, 1980), p. 239.
A.ISHIBASHI, S. EZOE and S. TANAKA,Bull. JSME 26 (1983) 1080.
A. N. DOBROVIDOV, et al.Svar Proiz. 3 (1975) 17.
A. N. Dobrovidov, Yu. A. Evtyushkin andV. I. Egorov,Met. Sci. Heat. Treat. 17 (1975) 787.
V. R. Egorov et al.Svar. Proiz. 1 (1985) 27.
I. O. Khazanov andN. I. Fomin,Welding Int. 4 (1990) 633.
I. O. Khazanov andN. I. Fomin,Met. Sci. Heat. Treat. 6 (1990) 461.
A. N. Popandopulo andG. D. Tkachevskaya,ibid. 2 (1977) 152.
O. N. Tanicheva, N. E. Orlava andL. A. Kyun,ibid. 3 (1989) 200.
N. I. Fomicev,Svar. Proiz. 4 (1980) 35.
W. Lucas,Met. Cons. and British Weld. J., Weld. Inst. Report P/48/71, 293.
K. G. K. Mpurti andS. Sundaresan,Metal Construction,June (1983) 331.
G. F. RAJAMANI, M. S. SHVNMUGAM and K. P. RAO,Weld. J. June (1992) 225-s.
R. N. Boldyrev,Svar. Proiz. 11 (1975) 35.
S. A. Westage andS. B. Dunkerton,The Weld. Inst. Res. Bull. February (1985) 49.
M. Yilmaz, Doctorate thesis, Yildiz Technical University, 1993.
S. Karagöz andH. Fischmeister,Steel Res. 1 (1987) 46.
Idem.,ibid. 58 (1987) 353.
S. Karagöz andH. O. Andren,Z. F. Metallkunde,Band 83 (1992) 386.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Yilmaz, M., Kaluc, E., Tülbentci, K. et al. Investigation into the weld zone of friction welded C45/HS6-5-2 dissimilar steel joints. J Mater Sci Lett 15, 360–362 (1996). https://doi.org/10.1007/BF00591663
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00591663