Abstract
A modified lead titanate composition has been synthesized by two different chemical techniques. The influence of the powder processing methods and the calcination temperatures on the physical characteristics, e.g. surface area and phase compositions of the powders, has been investigated. Powders of the same composition have also been prepared by attrition milling the raw materials. Results of the preliminary investigations indicate that the above physical characteristics are strongly dependent on the powder processing methods and calcination temperatures.
Similar content being viewed by others
References
I. Udea,Jpn J. Appl. Phys. 11 (1972) 450.
L. Eyarud, P. Eyarud, F. Gonnard andM. Troccaz,Ferroelectrics 34 (1981) 133.
P. Duran, F. Capel, J. R. Juardo andC. Moure, in “High Tech Ceramics”, edited by P. Vincenzi (Elsevier, Amsterdam, 1987) 1661.
A. Ahmad, T. A. Wheat, A. K. Kuriakose, D. H. H. Quon andR. Berry, MSL Division Report (1988), No. 88-19(OP), CANMET, EMR, Canada.
M. G. Silk, “Ultrasonic Transducers for Nondestructive Testing” (Adam Hilger, Bristol, 1984).
W. K. Lin, M. S. Jou andY. H. Chang,Ceram. Int. 14 (1988) 223.
J. R. Thomson,Ceram. Bull. 53 (1974) 421.
M. Murata, K. Wakino, K. Tanaka andY. Hamakawa,Res. Bull. 11 (1976) 323.
G. H. Haertling andC. E. Land,Ferroelectrics 3 (1972) 269.
L. M. Brown andK. B. Mazdiyazni,J. Amer. Ceram. Soc. 55 (1972) 541.
S. R. Gurkovich andJ. B. Blum,J. Mater. Sci. 20 (1985) 4479.
K. D. Budd, S. K. Dey andD. A. Payne, in British Ceramic Proceedings No. 36, “Electrical Ceramics”, edited by B. C. H. Steele, Stoke-On-Trent, UK, 17–18 December, (1985) pp. 107–122.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ahmad, A., Besso, K., Chehab, S. et al. Chemical processing of modified lead titanate. J Mater Sci 25, 5298–5302 (1990). https://doi.org/10.1007/BF00580164
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00580164