Abbreviations
- C o :
-
concentration of alloying element in the melt
- d i :
-
density of liquid metal wherei = Cr, Ti, Mo
- D L :
-
diffusion coefficient in the melt
- k o :
-
equilibrium partition coefficient
- m i :
-
slope of the liquidus line of the alloy system Fe -X i
- G/V :
-
ratio of temperature gradient/growth rate
- γ:
-
surface tension
- Λ:
-
ratio of surface tension/latent heat of fusion (γ/L)
- L :
-
latent heat of fusion
- S-L:
-
solid-liquid interface
- T E :
-
the pure solvent melting temperature
References
V. P. Kunjanpaa, N. J. Suutala andT. K. I. Moisio,Metal Constr. 12(6) (1980) 27.
J. A. Brooks, A. W. Thomson andJ. C. Williams,Welding J. 63(3) (1989) 71.
T. Takalo, N. J. Suutala andT. K. I. Moisio,Metall. Trans. A 10 (1979) 1173.
M. J. cieslak, w. F. savage,Welding J. 60(8) (1981) 131s.
T. P. S. gill, m. vijayalakshmi, g. B. gianomoorthy andK. A. padmanabhan,ibid. 65 (1986) 122s.
J. T. mcgrath, r. S. chandel, r. F. orr andJ. A. gianetto,Metal Constr. 20(9) (1988) 196R.
J. Rutter andB. Chalmers,Canad. J. Phys. 31 (1953) 15.
A. Ostrowski andE. W. Langer,Scand. J. Metallurgy 8 (1979) 177.
T. Sakamoto, K. Yoshikawa, C. Yoshida, J. Nakamura, T. Mori andH. Takada,Trans. ISIJ 20 (1980) 629.
W. W. Mullins andR. F. Sekerka,J. Appl. Phys. 35 (1964) 444.
S. R. Corieli andR. F. Sekerka, in “Rapid solidification processing principals and technologies II”, edited by R. Mehrabian, B. H. Kear and M. Cohen (Claitor's, Baton Rouge, LA, 1980) p. 35.
G. Piati andR. S. Vedani,J. Mater. Sci. 24A (1989) 1429.
G. N. Heintze andR. Mcpherson,Welding J. 65 (1986) 715.
W. A. tiller, in “Physical metallurgy”, 2nd Edn, edited by R. W Chan (North Holland) p. 426.
C. J. Smithels, in “Metal reference book” (Butterworths, London, 1976) p. 912.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Sarafianos, N., Kyriakopoulos, B. & Pavlidou, E. Planar interface growth in SMA welding of Ti-stabilized austenitic stainless steel and carbon steel. J Mater Sci Lett 15, 582–585 (1996). https://doi.org/10.1007/BF00579257
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00579257