Abstract
Equations for calculating reeling devices with a constant radius of rotation are proposed. Jamming of the reeling device is not a function of the thread input tension. Correct selection of the parameters of the reeling device will allow completely fabricating packs having a significant ratio of winding and thread carrier diameters. A ratio of 8.5 was confirmed experimentally. The calculation can be used in issuing the initial requirements for equipment with respect to the pack parameters.
Similar content being viewed by others
References
D. D. Churabo, Instrument Parts and Units [in Russian], Mashgiz., Moscow (1961).
D. N. Reshetov, Machine Parts [in Russian], Mashinostroenie, Moscow (1964).
Additional information
Malye Tekhnologii Scientific — Production Co., Tver'. Translated from Khimicheskie Volokna, No. 4, pp. 50–53, July–August, 1995.
Rights and permissions
About this article
Cite this article
Zhil'chenko, S.V. Calculation of reeling devices of the flyer type with a constant radius of rotation. Fibre Chem 27, 282–286 (1996). https://doi.org/10.1007/BF00572810
Issue Date:
DOI: https://doi.org/10.1007/BF00572810