Skip to main content
SpringerLink
Log in

Modification of metallic materials by processing with high-temperature pulsed plasma streams

  • Published:
Russian Physics Journal Aims and scope

Abstract

A review is given of investigations of the modification of metallic materials by processing them with high-temperature pulsed plasma streams having incident power densities in the range (3–100)×109 W/m2 with pulse durations of between 2–3 and 100 µsec. The main experimental results are presented on changes in the microstructure, the mechanical and tribological characteristics, the corrosion resistance, and the radiation-induced erosion when the modified materials are irradiated with ions. An analysis of these results shows that processing with high-temperature pulsed plasma streams is a comprehensive method for changing in a controlled manner the structural-phase state and various operational properties of materials, the extent of the change being determined by the irradiation conditions (the power density of the incident stream, the type of plasma, etc.), the type of material, and its previous processing.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. N. N. Rykalin, A. A. Uglov, V. V. Zuev, and A. N. Kokora, Laser and Electron-Beam Processing of Materials: A Handbook [in Russian], Mashinostroenie, Moscow (1985).

    Google Scholar 

  2. J. M. Poate et al. (eds.), Surface Modification and Alloying by Laser, Ion, and Electron Beams [Russian translation], Mashinostroenie, Moscow (1987).

    Google Scholar 

  3. A. N. Didenko, A. E. Ligachev, and I. B. Kurakin, Action of Charged-Particle Beams on Metal and Alloy Surfaces [in Russian], Energoatomizdat, Moscow (1987).

    Google Scholar 

  4. F. F. Komarov, Ion Implantation in Metals [in Russian], Metallurgiya, Moscow (1990).

    Google Scholar 

  5. Yu. A. Bykovskii, V. N. Nevolin, and V. Yu. Fominskii, Ion and Laser Implantation of Metallic Materials [in Russian], Energoatomizdat, Moscow (1991).

    Google Scholar 

  6. A. D. Pogrebnyak, G. E. Remnev, S. A. Chistyakov, and A. E. Ligachev, Izv. Vyssh. Uchebn. Zaved. Fiz., No. 1, 52 (1987).

  7. N. G. Koval'skii et al., (eds.), Abstracts of Papers presented at Conf. of the Interaction of Plasma and Electron Radiation Fluxes with Matter, Moscow, February 21–24, 1984 [in Russian], TsNIIatominform, Moscow (1984).

  8. D. M. Dykhne et al. (eds.), Abstracts of Papers presented at Conf. on the Interaction of Plasma and Electron Radiation Fluxes with Matter, Frunze, September 4–7, 1990 [in Russian], I.V. Kurchatov Institute of Atomic Energy, Moscow (1990).

  9. B. A. Kalin, V. I. Pol'skii, V. L. Yakushin, et al., Fiz. Khim. Obrab. Mater., No. 2, 20 (1991).

  10. V. I. Pol'skii, B. A. Kalin, P. I. Kartsev, et al., At. Énerg.,56, 83 (1984).

    Google Scholar 

  11. A. G. Belikov, V. P. Goncharenko, D. K. Goncharenko, et al., VANT Ser. Plasma Physics and the Problems of Controlled Thermonuclear Fusion, No. 1(6), 4 (1977).

  12. B. A. Kalin, V. I. Pol'skii, G. N. Shishkin, et al., Abstracts of Papers presented at Conf. on the Modification of the Properties of Structural Materials by Charged Particle Beams, Tomsk, November 16–18, 1988, Part II [in Russian], by S. M. Kirov Polytechnic Institute, Tomsk (1988), pp. 92–94.

  13. B. A. Kalin, V. I. Pol'skii, G. N. Shishkin, and V. L. Yakushin, Abstracts of Papers presented at Conf. on the Interaction of Atomic Particles with Solid Surfaces, Tashkent, 1989, Fan, Tashkent (1989), pp. 169–170.

  14. B. A. Kalin, V. I. Pol'skii, G. N. Shishkin, et al., Radiation Resistance of Atomic Technology Materials [in Russian], Énergoatomizdat, Moscow (1989), pp. 50–61.

    Google Scholar 

  15. V. F. Zelenskii, I. M. Neklyudov, V. N. Voevodin, et al., Preprint No. 89-64 [in Russian], Physicotechnical Institute, Academy of Sciences of the Ukrainian SSR, Kharkov (1989).

  16. B. A. Kalin, V. I. Pol'skii, V. L. Yakushin, et al., in: Problems of Physical Materials Science: A Collection of Scientific Works (ed. by B.A. Kalin) [in Russian], Engineering-Physics Institute, Moscow (1991), pp. 15–31.

    Google Scholar 

  17. F. B. Baimbetov, N. A. Iminova, K. Z. Nurbaev, and Zh. Kh. Khamitov, in Reference [8], pp. 107–108.

  18. S. G. Alikhanov, V. P. Bakhtin, V. I. Vasil'ev, et al., Poverkhn. Fiz. Khim. Mekh., No. 5, 142 (1983).

  19. V. A. Alekseev, I. K. Konkashbaev, E. A. Kiselev, et al., Pis'ma Zh. Tekh. Fiz.,9, 42 (1983).

    Google Scholar 

  20. A. N. Didenko, A. E. Ligachev, É. V. Kozlov, et al., Dokl. Akad. Nauk SSSR,296, 869 (1987).

    Google Scholar 

  21. V. I. Itin, I. S. Kashinskaya, S. V. Lykov, et al., Physics of Wear Resistance of Metal Surfaces [in Russian], A. F. Ioffe Physicotechnical Institute, Academy of Sciences of the USSR, Leningrad (1988), pp. 119–123.

    Google Scholar 

  22. A. D. Pogrebnyak, Yu. P. Sharkeev, N. A. Makhmudov, et al., Poverkhn. Fiz. Khim. Mekh., No. 1, 93 (1993).

  23. V. V. Nikolaenko, V. N. Lyashenko, O. V. Fedorova, et al., in Reference [8], pp. 146–147.

  24. V. V. Alekseev, E. A. Kiselev, T. D. Kiseleva, et al., in Reference [7], pp. 108–109.

  25. B. A. Kalin, V. I. Pol'skii, V. L. Yakushin, and S. S. Tserevitinov, in Reference [12], Part III, pp. 53–55.

  26. B. A. Kalin, V. I. Pol'skii, V. L. Yakushin, et al., VAT Ser. Fiz. Radiat. Povrezhd. Radiat. Materialoved., No. 1 (55), Physicotechnical Institute, Academy of Sciences of the Ukrainian SSR, Kharkov (1989), pp. 108–112.

    Google Scholar 

  27. V. A. Alekseev, R. A. Voskanyan, V. Yu. Varyanitsa, et al., in Reference [7], pp. 104–105.

  28. V. I. Pol'skii, B. A. Kalin, D. M. Skorov, et al., in Reference [7], pp. 126–128.

  29. B. A. Kalin, V. I. Pol'skii, V. L. Yakushin, and S. S. Tserevitinov, in Reference [12], Part I, pp. 100–102.

  30. B. A. Kalin, V. I. Pol'ski, V.L. Yakushin, et al., in Reference [26], pp. 113–116.

    Google Scholar 

  31. G. V. Gordeeva, M. I. Guseva, E. S. Ionova, et al., Poverkhn. Fiz. Khim. Mekh. No. 8, 154 (1989).

  32. G. K. Wehner, Whiskers, Cones, and Pyramids Created in Sputtering by Ion Bombardment, Report No. CR-159549, NASA (1979).

  33. A. A. Verigin, Yu. Yu. Kryuchkov, A. D. Pogrebnyak, et al., Poverkhn. Fiz. Khim. Mekh., No. 9, 106 (1988).

  34. V. I. Vasil'ev, I. V. Lyasotskii, V. Myanko, et al., in Reference [8], p. 120.

  35. L. A. Gerasimova, V. Ya. Kudyakov, V. N. Lyashenko, and S. S. Tserevitinov, in Reference [8], pp. 124–125.

Download references

Author information

Authors and Affiliations

  1. Engineering-Physics Institute, Moscow

    B. A. Kalin, V. L. Yakushin & B. I. Pol'skii

Authors
  1. B. A. Kalin
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. V. L. Yakushin
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. B. I. Pol'skii
    View author publications

    You can also search for this author in PubMed Google Scholar

Additional information

Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 5, pp. 109–126, May, 1993.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Kalin, B.A., Yakushin, V.L. & Pol'skii, B.I. Modification of metallic materials by processing with high-temperature pulsed plasma streams. Russ Phys J 37, 491–505 (1994). https://doi.org/10.1007/BF00560118

Download citation

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF00560118

Keywords

Search

Navigation