Literature cited
M. B. Shtern, ”Determining equations for compacted plastic porous bodies,” Poroshk. Metall., No. 4, 17–23 (1981).
A. M. Laptev, ”Criterion of plasticity of porous bodies,” Poroshk. Metall., No. 7, 12–18 (1982).
V. V. Skorokhod, M. B. Shtern, and I. F. Martynova, ”Theory of the nonlinearly viscous and plastic behavior of porous bodies,” Poroshk. Metall., No. 8, 11–17 (1988).
B. A. Druyanov, Applied Theory of the Plasticity of Porous Bodies [in Russian], Mashinostroenie, Moscow (1989).
M. B. Shtern, ”Model of the deformation processes of compressible materials with pore formation taken into account. I. Determination of the equation and loading surface,” Poroshk. Metall., No. 5, 28–34 (1989).
M. B. Shtern, ”Model of the deformation processes of compressible materials with pore formation taken into account,” Poroshk. Metall., No. 6, 34–39 (1989).
L. D. Landau and E. M. Lifshits, Theory of Elasticity [in Russian], Nauka, Moscow (1965).
M. S. Koval'chenko, ”Mechanical properties of porous materials. I. Elastic and rheological properties,” Poroshk. Metall., No. 3, 89–96 (1993).
M. S. Koval'chenko, ”The mechanical properties of sintered materials,” Poroshk. Metall., No. 3, 101–106 (1991).
V. Z. Midukov and V. D. Rud', ”Experimental investigations of plastic deformations of porous bodies,” Poroshk. Metall., No. 8, 10–16 (1982).
V. Z. Midukov, ”The effect of internal stresses on the criterion of plasticity of porous materials,” Poroshk. Metall., No. 1, 1–7 (1991).
A. S. Drachinskii, A. E. Kushchevskii, Yu. M. Podrezov, and S. A. Firstov, ”Strain-hardening and failure of powdered iron,” Poroshk. Metall., No. 10, 78–83 (1984).
Additional information
Institute of Materials Science, Academy of Sciences of the Ukraine, Kiev. Translated from Poroshkovaya Metallurgiya, No. 4(364), pp. 89–95, April, 1993.
Rights and permissions
About this article
Cite this article
Koval'chenko, M.S. Mechanical properties of isotropic porous materials. II. Uniaxial tensile and compressive yield points. Powder Metall Met Ceram 32, 366–370 (1993). https://doi.org/10.1007/BF00560025
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00560025