Abstract
We examine bend testing of thin specimens when the specimens are wound on a cylinder of variable curvature, with a logarithmic spiral base. We present the bending diagram and expressions for calculating the stress and strain. The test error for winding is half the error for extension of porous strips.
Similar content being viewed by others
References
“Powder materials. Bend testing methods,” GOST 18228-85, introduced 01.07.86.
“Metallic coatings. Review of plasticity measurement methods,” ISO 8401:1986.
B. S. Kasatkin, A. B. Kudrin, L. M. Lobanov et al., Experimental Methods for Stress and Strain Investigations: Handbook [in Russian], Naukova Dumka, Kiev (1981).
A. A. Savelov, Plane Curves. Classification, Properties, Application: Handbook [in Russian], Fizmatizdat, Moscow (1960).
N. N. Malinin, Applied Theory of Plasticity and Creep [in Russian], Mashinostroenie, Moscow (1968).
“Precision alloy strips for elastic elements. Technical conditions,” GOST 14117-85, introduced 01.01.75.
“Iron-based sintered hard-surfacing electrode strips,” GOST 22366-77, introduced 01.01.78.
“Metals. Tensile test method for thin sheets and strips,” GOST 11701-84, introduced 01.07.66.
Additional information
Institute of Problems in Materials Science, National Academy of Sciences of Ukraine, Kiev. Translated from Poroshkovaya Metallurgiya, Nos. 3–4, pp. 79–85, March–April, 1994.
Rights and permissions
About this article
Cite this article
Otrok, A.I., Meleshko, I.V. Bend testing of powder strip wound on a cylinder of variable curavature. Powder Metall Met Ceram 33, 181–185 (1995). https://doi.org/10.1007/BF00559781
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00559781