This is a preview of subscription content, log in via an institution to check access.
References
R. K. Ivashchenko, Yu. V. Mil'man, N. P. Moskalenko, et al., “Mechanical properties and strain-hardening of sintered iron,” Poroshk. Metall., No. 7, 68–72 (1984).
Yu. V. Mil'man, “Mechanical properties of sintered materials. I. Strength characteristics of sintered materials,” Poroshk. Metall., No. 1, 34–45 (1991).
Yu. V. Mil'man, R. K. Ivashchenko, and N. P. Zakharova, “Mechanical properties of sintered materials. II. Effect of porosity on the ductility of powdered alloys,” Poroshk. Metall., No. 3, 93–100 (1991).
Yu. V. Mil'man, I. V. Gridneva, and S. I. Chugunova, “Chart of mechanisms of failure of tungsten,” Poroshk. Metall., No. 6, 89–96 (1983).
H. E. Exner and D. Hohl, “Fracture behavior of sintered iron,” Powder Met. Int.,10 No. 4, 193–196 (1978).
E. Dubrova, L. Parilak, and E. Rudnayova, “Heterogeneity of deformation processes in the bulk of porous iron during static tensile testing,” Powder Met. Int.,19 No. 3, 23–26 (1987).
W. Pompe, G. Leither, and K. Wetring, “Crack propagation and processes near crack tip of metallic sintered materials,” Powder Met., No. 4, 177–182 (1980).
E. R. Leheup and I. R. Moon, “Yield and fracture phenomena in powder-forged Fe-0.2 C and their prediction by NDT methods,” Powder Met., No. 4, 182–188 (1980).
T. A. Tumpyanskaya, V. Ya. Bulanov, and V. G. Zyryanov, Atlas of Structures of Iron Base Powder Materials [in Russian], Nauka, Moscow (1986).
B. L. Baskin, R. K. Ivashchenko, A. N. Leksovskii, and Yu. V. Mil'man, “Investigation of the mechanism of deformation and failue of powdered iron,” in: Technological and Structural Ductility of Powder Materials, Institute Problem Materialovedeniya Akad. Nauk Ukrainy, Kiev (1988).
V. I. Vladimirov, The Physical Nature of Failure of Metals [in Russian], Metallurgiya, Moscow (1984).
V. D. Kal'per and B. I. Beilin, “The effect of cold plastic deformation on the mechanical properties of sintered Fe,” Metalloved. Term. Obrab. Met., No. 10, 2–5 (1982).
V. E. Panin and V. V. Grinyaev, “Structural levels of deformation of porous bodies,” in: Rheological Models and Processes of Deformation of Porous Powder and Composite Materials, Naukova Dumka, Kiev (1985), pp. 90–98.
V. E. Panin, Yu. V. Grinyaev, and T. F. Emukova, “Structural levels of deformation of solids,” Izv. Vyssh. Uchebn. Zaved., Fiz., No. 6, 5–28 (1982).
A. N. Nikolenko and M. S. Koval'chenko, “Hierarchic structure, levels of description, classification of models, and analysis of processes of compaction of powder materials,” Poroshk. Metall., No. 6, 29–33 (199).
W. Schott and K. Wicters, “On the nature of the sintering contact zone,” Powder Met. Int.,18 No. 3, 135–139 (1986).
K. E. Easterling, “Electron microscopy study of stresses at contact between sintered aluminum particles,” Powder Met.,7, No. 2, 29–31 (1970).
Additional information
Institute of Problems in Materials Science, Academy of Sciences of the Ukraine, Kiev. Translated from Poroshkovaya Metallurgiya, Nos. 1–2, pp. 77–85, January–February, 1994.
Rights and permissions
About this article
Cite this article
Mil'man, Y.V., Leksovskii, A.M., Ivashchenko, R.K. et al. Investigation of the special traits of failure of sintered iron by the in situ method. Powder Metall Met Ceram 33, 71–77 (1995). https://doi.org/10.1007/BF00559714
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00559714