Abstract
Using the results of differential thermal analysis, the sintering parameters and extrusion temperatures for the fabrication of Cu-Cr-Zn-TiC powder alloys were determined. The optimal compositions, and techniques for their production were identified. Industrial tests of electrodes prepared by extrusion of the dispersion hardened materials showed that their durability is 3–5 times greater than that of standard electrodes.
Similar content being viewed by others
References
N. V. Manukyan, Powder Metallurgy Technology [in Russian], Aiastan, Yerevan (1986).
M. E. Drits, N. R. Bochvar, L. S. Guzei, et al., Binary and Multicomponent Copper Systems (Handbook) [in Russian], Nauka, Moscow (1979).
Additional information
Yerevan Polytechnic Institute. Translated from Poroshkovaya Metallurgiya, Nos. 1–2, pp. 43–46, January–February, 1994.
Rights and permissions
About this article
Cite this article
Agbalyan, S.A., Martirosyan, N.S., Arutyunyan, A.S. et al. Copper-based dispersion hardened materials obtained by extrusion. Powder Metall Met Ceram 33, 40–42 (1995). https://doi.org/10.1007/BF00559706
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00559706