References
V. I. Spitsyn and O. A. Troitskii, Electroplastic Deformation of Metals [in Russian], Nauka, Moscow (1985).
A. I. Raichenko, Fundamentals of the Sintering of Powders by the Transmission of an Electric Current [in Russian], Metallurgizdat, Moscow (1987).
Yu. V. Kornyushin, “Kinetics of the early stages of electrocontact sintering,” Metallofizika,5, No. 3, 116–117 (1987).
L. O. Andrushchik, O. N. Balakshina, Yu. V. Kornyushin, and S. P. Oshkaderov, “Motive forces and kinetics of diffusion in the sintering of metallic powders,” Ibid.,9, No. 2, 32–37 (1987).
L. O. Andrushchik, Yu. V. Kornyushin, S. P. Oshkaderov, et al., “Formation of interparticle connections during the electrocontact sintering of metallic powders,” Ibid.,13, No. 10, 110–121 (1991).
V. G. Petrikov, I. M. Mal'tsev, and L. A. Pyryalov, “Method of electro-impulsive sintering for metallic powder and a unit for its realization,” Avt. Svid. No. 174893 SSSR, Otkrytiya. Izobreteniya, No. 27, 48 (1992).
Materials in Machine Construction: Handbook [in Russian], Vol. 3, Metallurgiya, Moscow (1968).
V. N. Antsiferov, S. N. Peshchenko, and P. G. Kurilov, Interdiffusion and Homogenization in Powders [in Russian], Metallurgiya, Moscow (1968).
Ya. S. Umanskii, Yu. A. Skakov, A. N. Ivanov, and L. N. Rastorguev, Crystallography, X-Ray Diffraction Analysis, and Electron Microscopy [in Russian], Metallurgiya, Moscow (1982).
V. N. Antsiferov, G. V. Bobrov, L. K. Druzhinin, et al., Powder Metallurgy [in Russian], Metallurgiya, Moscow (1987).
Additional information
Nizhegorod Technical University. Translated from Poroshkovaya Metallurgiya, No. 11–12, pp. 79–84, November–December, 1994.
Rights and permissions
About this article
Cite this article
Mal'tsev, I.M., Petrikov, V.G. Effect of isothermal annealing on the properties of rolled products of powder alloys of the system Fe-Cr-Ni. Powder Metall Met Ceram 33, 633–637 (1995). https://doi.org/10.1007/BF00559676
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00559676