Abstract
A method has been developed for determining the strength and plasticity characteristics of detonation coatings; the structure and phase factors have been used along with the physicomechanical characteristics and the adhesion to optimize the production conditions. Phase transformations occur during the formation of the coatings that govern the strength, ductility, and tribotechnical properties. In spite of the structural and phase changes that accompany coating formation, layers up to 0.25 mm thick have the properties of the compact materials.
Similar content being viewed by others
References
C. J. S. Guest, “Plasma and detonation gun coatings,” Trans. Inst. Metal. Finish.,64, No. 1, 33–38 (1986).
Yu. A. Kharlamov and M. I. Livshits, “Use of gas-detonation coating in repairing,” in: Technology and Organization of Production [in Russian], Issue4, Kiev (1985), pp. 38–39.
W. Nadig, “Pulverschichten Schutzen beansprochte Bauteile vor Verschleib und Korrosion,” Maschinenmarkt,91, No. 85, 1986–1987 (1985).
E. Kretzschmar and W. Satke, “Metallpulver-flammspritzen — Reparaturtechnologie für kleine Werkstatten,” Argartechnik,35, No. 11, 488–490 (1985).
Helmut Behnisch, “Thermisches Spritzen in der Instand-haltung-flamm und Plasmaspritzschichten gegen Verschleib und Korrosion,” Werkstatt und Betr.,118, No. 11, 771–775 (1985).
Yu. A. Kharlamov, B. L. Ryaboshapko, Yu. I. Pisklov, and T. P. Shmyreva, “Changes in the phase composition of VK8 powder on gas-detonation coating,” Poroshk. Metall., No. 11, 80–85 (1985).
V. K. Fedorenko, Yu. V. Mil'man, V. Kh. Kadyrov, et al., “A study on the physicomechanical properties and failure in detonation coatings,” Poroshk. Metall., No. 11, 88–94 (1987).
A. P. Gulyaev, “Viscous and brittle failure in steel,” in: Abstracts on Brittle Failure Physics [in Russian], Part 2, Kiev (1976), pp. 75–78.
Additional information
Institute of Problems of Materials Science, National Academy of Sciences of the Ukraine, Kiev. Translated from Poroshkovaya Metallurgiya, Nos. 7–8, pp. 59–66, July–August, 1994.
Rights and permissions
About this article
Cite this article
Aksenov, A.F., Fedorenko, V.K., Klimenko, V.S. et al. Physicomechanical properties of detonation coatings made from stainless-steel powders. Powder Metall Met Ceram 33, 385–391 (1995). https://doi.org/10.1007/BF00559585
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00559585