Abstract
Features of vibratory milling of titanium carbide powder in acetone and in air are studied. The effect of milling titanium carbide on the structure and properties of titanium carbide-nickel-chromium composites is considered. The mechanism of carbide grain growth during liquid-phase sintering of powder composites is discussed.
Similar content being viewed by others
References
S. S. Kiparisov, Yu. V. Levinskii, and A. P. Petrov, Titanium Carbide. Preparation Properties, Applications [in Russian], Metallurgiya, Moscow (1987).
V. M. Maslov, V. M. Bunin, S. S. Mamyan, et al., Possibilities for Preparing Hard Alloys Grade TN-20 Based on SHS Titanium Carbide [in Russian], Chernogolovka (1985).
V. E. Matsera, V. S. Pugin, A. G. Dobrovol'skii, et al., “Milling of powders in a planetary centrifugal mill. I. Determination of optimum milling conditions,” Poroshk. Metal., No. 6, 11–15 (1973).
R. A. Adrievskii, A. Zh. Dzneladze, L. N. Petrov, et al., “Milling of titanium carbide and nitride prepared by the SHS method in an attrition mill,” Poroshk. Metal., No. 11, 1–4 (1983).
V. M. Bunin, V. I. Torbov, V. M. Maslov, et al., “Milling of SHS titanium carbide in ball mills,” in: Study of Hard Alloys: Proc. VNIITS [in Russian], Metallurgiya, Moscow (1991).
G. S. Kreimer, Strength of Hard Alloys [in Russian], Metallurgiya, Moscow (1971).
R. Warren and M. B. Waldron, “Microstructural development during the liquid-phase sintering of cemented carbides,” Powder Met.,15, No. 30, 180–201 (1972).
Additional information
Institute of Strength Physics and Materials Science, Siberian Section of the Russian Academy of Sciences, Tomsk. Translated from Poroshkovaya Metalluregiya, No. 11/12(382), pp. 5–9, November–December, 1995.
Rights and permissions
About this article
Cite this article
Pribytkov, G.A., Dekhonova, S.Z., Korzhova, V.V. et al. Physicomechanical properties of sintered composites based on titanium carbide powder subjected to vibratory milling. Powder Metall Met Ceram 34, 590–594 (1996). https://doi.org/10.1007/BF00559485
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00559485