This is a preview of subscription content, log in via an institution to check access.
References
H. Kaesche,Metal Corrosion. Physico-Chemical Principles and Actual Problems [Russian translation], Metallurgiya, Moscow (1982).
S. Mrovec and T. Verbeure,Contemporary Heat-Resistant Materials [Russian translation], Metallurgiya, Moscow (1986).
B.G. Strongin, I.A. Varvus, and P.A. Yakovyshyn,An Improved Device for Measuring Elastic Energy Damping Characteristics, Deposited at UkrNIINTI, 08.07.93, No. 798 Ukd 83, Chernivtsi University, Chernivtsi (1983).
M.A. Krishtal and S.A. Golovin,Internal Friction and the Structure of Metals [in Russian], Metallurgiya, Moscow (1976).
Shimodaira Masuo et al., “Acceleration of fatigue crack growth in NT80 and SUS 304 steels in a 3% NaCl solution under extremely low load frequencies,”J. Soc. Mater. Sci. Jpn.,39, No. 37, 162–168 (1990).
K. Komai et al., “Dynamic and cyclic stress corrosion cracking resistance of metals,” in:Adv. Materials Severe Service Appl. Proceedings of the Japan–USA Scientific Seminar (Tokyo, 1986), London, New York (1987), pp. 373–383.
S.R. Scully and P.J. Moran, “The influence of strain on hydrogen entry and transport in a high strength steel in sodium chloride solution,”J. Electrochem. Soc.,135, No. 6, 1337–1348 (1988).
Additional information
Chernivtsi State University, Chernivtsi. Translated from Fiziko-Khimicheskaya Mekhanika Materialov, Vol. 30, No. 1, pp. 132–134, January–February, 1994.
Rights and permissions
About this article
Cite this article
Strongin, B.G., Oleinich, A.B. Formation of defects in materials attacked by aggressive media. Mater Sci 30, 141–143 (1995). https://doi.org/10.1007/BF00559031
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00559031