Materials Science

, Volume 29, Issue 5, pp 526–529 | Cite as

Protection of titanium-alloy ingots from gas saturation on heating

  • T. V. Kechedzhi
  • L. A. Guk
Science To Production


Coating compositions have been developed for protection of titanium alloys from gas saturation in lengthy ingot heating for rolling at 1200°C. As a coating base, 82 and 72+80 glass enamels were employed. Chasov Yar clay, aluminum oxide, metallic aluminum, and sodium tripolyphosphate were used as the mill additives for providing high protection and good coating adhesion to the ingots. Sulfite liquor, water glass, and carboxymethylcellulose were taken as binding components. In all cases, the laborious stage of preliminary ingot metallization has been eliminated.


Titanium Alloy Sulfite Carboxymethylcellulose Good Coating Coating Base 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Copyright information

© Plenum Publishing Corporation 1994

Authors and Affiliations

  • T. V. Kechedzhi
  • L. A. Guk

There are no affiliations available

Personalised recommendations