Abstract
Increasing the orientational draw ratio of a freshly spun high-modulus fibre above some limit causes the appearance of periodic thinning in the drawn twist. It was hypothesized that thinning is formed according to the mechanism of deformation resonance described previously for spinneret drawing of spinning solutions and melts. An explanation of the mechanism of deformation resonance was proposed, where this phenomenon takes place during drawing of an inhomogeneous material due to partial fracture of the weaker part of it. The proposed hypothesis is in satisfactory agreement with the experimental data. In production of high-modulus viscose fibres, the orientational draw ratio should not exceed 2.1–2.2 (110–120%), and the first drawing should be within the limits of 1.6–1.7 (60–70%).
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
R. E. Christensen, SPEJ,18, 751–763 (1962).
A. T. Serkov, E. V. Grekhova, et al., Khim. Volokna, No. 4, 40–42 (1991).
V. N. Kiya-Oglu, V. I. Ognev, and G. I. Kudryavtsev, Khim. Volokna, No. 2, 17–19 (1993).
R. J. Fisher and M. M. Denn, Chem. Eng. Sci.,30, 1129–1134 (1975).
Ch. D. Han and S. M. Apte, J. Appl. Polym. Sci.,24, 61–87 (1979).
A. T. Serkov, V. V. Skorobogatykh, et al., Cotton-like Fibres [in Russian], Khimiya, Moscow (1987), p. 20.
J. L. White and Y. Ide, J. Appl. Polym. Sci.,22, No. 11, 3057–3074 (1978).
A. T. Serkov, Viscose Fibres [in Russian], Khimiya, Moscow (1981), p. 237.
Additional information
All-Russian Scientific-Research Institute of Polymer Fibres, Mytishchi. Translated from Khimicheskie Volokna, No. 6, pp. 34–38, November–December, 1995.
Rights and permissions
About this article
Cite this article
Serkov, A.T., Skorobogatykh, V.V. Deformation resonance in orientational drawing of high-modulus viscose fibre twist. Fibre Chem 27, 413–418 (1996). https://doi.org/10.1007/BF00556172
Issue Date:
DOI: https://doi.org/10.1007/BF00556172