Abstract
A ridging or corrugation structure has been found to form on grain-boundary surfaces in zinc and aluminium parallel to the solidification direction. The density and severity of this ridging is found to increase with increasing solidification rates. The ridging is associated with substructure in the bicrystals forming the grain-boundary. Previous experiments suggest that this ridging can impart a considerable amount of resistance to grain-boundary sliding perpendicular to the solidification direction.
Similar content being viewed by others
References
K. E. Puttick andR. King,J. Inst. Met. 80 (1951) 537.
C. A. P. Horton andC. J. Beevers,Acta Met. 16 (1968) 733.
K. E. Puttick andB. Tuck,ibid 13 (1965) 1043.
F. Weinberg,ibid 2 (1954) 889.
F. Weinberg,Trans. AIME 212 (1958) 808.
J. L. Walter andH. E. Cline,ibid 242 (1968) 1823.
K. E. Puttick andR. King,J. Inst. Met. 8b (1951) 1378.
T. R. Anthony andJ. L. Walter,Scripta Met. 3 (1969) 281.
B. Fazan, O. D. Herby, andE. J. Dorn,Trans. AIME 200 (1954) 919.
D. Mclean, “Creep and Fracture of Metals at High Temperatures” (NPL Symposium, London, 1954) p. 73.
B. Chalmers,Proc. Roy. Soc. A175 (1940) 100.
R. L. Fleischer andR. S. Davis,Trans. AIME 215 (1959) 665.
P. E. Doherty andB. Chalmers,ibid 224 (1964) 1124.
I. S. Servi andN. F. Graves,ibid 212 (1958) 315.
J. Rezek andB. Craig,ibid 221 (1961) 715.
K. F. Hulme,Acta Met. 2 (1954) 810.
J. W. Rutter, “Liquid Metals and Solidification” (ASM Cleveland, Ohio, 1957) p. 265.
I. K. Zasimchuk andD. E. Ovsienko, “Growth of Crystals” (Plenum Publishing Corp, New York, 1968) p. 73.
J. Rezek andB. G. Craig,Can. J. Phys. 40 (1962) 674.
D. Jaffrey andG. A. Chadwick,Phil. Mag. 18 (1968) 573.
J. W. Rutter andK. T. Aust,Acta Met. 13 (1965) 181.
A. Guinier andJ. Tennevin,Prog. Met. Phys. 2 (1950) 177.
M. N. Parthasarathi andP. A. Beck,Trans. AIME 212 (1958) 821.
F. N. Rhines, W. E. Bond, andM. A. Kissel,Trans. ASM 48 (1956) 919.
H. Brunner andN. J. Grant,Trans. AIME 215 (1959) 48.
H. Hencky,Z. angew. Mat und Mech 3 (1923) 241.
D. Mclean,J. Inst. Met. 93 (1964–65) 320.
G. H. Bishop, W. H. Hartt, andG. A. Bruggeham, submitted toActa Met. (1969);J. Metals 20 (1968) 71a.
F. Weinberg,Trans AIME 245 (1969) 2009.
C. A. P. Horton andC. J. Beevers,Scripta Met. 3 (1969) 285.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Anthony, T.R., Walter, J.L. Corrugated bicrystal grain-boundaries in cast aluminium and zinc. J Mater Sci 5, 133–140 (1970). https://doi.org/10.1007/BF00554631
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00554631