Conclusions
Capillary diameter, shear stress, and jet stretch all affect the phenomenon of specific fibre formation in extrudates of the mixtures POM-copolyamide 548, POM-polystyrene, POM-ethylene-vinyl acetate copolymer, POM-polyvinyl alcohol, and low-pressure polyethylene-copolyamide 548.
The optimum regimes found for deformation of mixture melts have been used in the development of technology for preparing ultrathin synthetic fibres and precision filters based on them.
Similar content being viewed by others
Literature cited
M. V. Tsebrenko et al., Kolloidn. Zh.,38, No. 1, 200–204 (1976).
M. V. Tsebrenko et al., Intern. J. Polym. Mater.,3, 99–116 (1974).
A. V. Yudin et al., International Symposium on Man-made Fibres [in Russian], Kalinin. Preprints, No. 3, 193–142 (1974).
M. V. Tsebrenko, N. M. Rezanova, and A. V. Yudin, Khim. Volokna, No. 6, 36–38 (1979).
M. V. Tsebrenko, Vysokomol. Soedin. Ser. B,20, No. 8, 600–603 (1978).
M. V. Tsebrenko, in: Machinery and Technology in the Processing of Rubbers, Polymers, and Rubber Mixtures [in Russian], Yaroslavl' (1977), pp. 42–47.
M. V. Tsebrenko, N. M. Rezanova, and G. V. Vinogradov, Polym. Eng. Sci.,20, No. 15, 1023–1027 (1980).
A. A. Berlin and V. E. Basin, Bases of Polymer Adhesion [in Russian], Khimiya, Moscow (1974).
C. D. Han and K. Funatsu, J. Rheol.,22, No. 2, 113–133 (1978).
Yu. S. Lipatov, A. E. Fainerman, and O. V. Anokhin, Dokl. Akad. Nauk SSSR,231, No. 2, 381–384 (1976).
M. Jakob et al., Faserf. Textilt.,27, No. 7, 333–342 (1976).
B. L. Lee and J. L. White, Trans. Soc. Rheol.,19, No. 3, 481–492 (1975).
Additional information
Translated from Khimicheskie Volokna, No. 3, pp. 28–31, May–June, 1983.
Rights and permissions
About this article
Cite this article
Tsebrenko, M.V. Effect of deformation conditions of fibre-formation in spinning from heterogeneous mixtures of polymers. Fibre Chem 15, 193–198 (1984). https://doi.org/10.1007/BF00552799
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00552799