Abstract
The techniques of slow sintering, addition of a volatile flux, and grain growth inhibition have been used to produce high density sintering in pure barium titanate. The use of carbon as grain growth inhibitor gave a density of 99% theoretical at 0.7μm grain size. This technique may be used for other suitable ceramics, when the proposed application requires improved physical properties. An extension of the procedure gives a range of electrically conducting ceramics.
Similar content being viewed by others
References
G. S. Perry, J. Materials Sci. 1 (1966) 186.
P. J. Jorgensen and J. H. Westbrook, J. Amer. Ceram. Soc. 47 (1964) 332.
C. A. Miller, CERL Lab. Report 1427 (1967).
E. P. Hyatt, S. A. Long, and R. E. Rose, Proc. Electronics Division Meeting, Amer. Ceram. Soc. (Los Angeles, 1965) (17-E-65F).
T. M. Harkulich, J. Magder, M. S. Vukasovich, and R. J. Lockhart, J. Amer. Ceram. Soc. 49 (1966) 295.
W. R. Bratschun, ibid 45 (1962) 611.
C. A. Miller, unpublished.
Telegraph Condenser Co Ltd, British Patent No. 984,395 (1965).
“Handbook of Chemistry and Physics”, (Chemical Rubber Publishing Co, Cleveland, Ohio, 1966).
L. K. Templeton and J. A. Pask, J. Amer. Ceram. Soc 42 (1959) 212.
O. Saburi, “Experimental Researches in Semiconducting Barium Titanate” (Murata, Japan, 1961).
G. Weise, F. Erdmann-Jesnitzer, and F. Thümmler, Bergakademie 10 (1958) 316.
C. A. Miller, Brit. J. Appl. Phys. 18 (1967) 1689.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Miller, C.A. High density sintering of pure barium titanate. J Mater Sci 3, 436–439 (1968). https://doi.org/10.1007/BF00550988
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00550988