Abstract
Fusion-casting of high temperature materials results in a dense interlocking network of crystals. This method produces the highest strength and most corrosion resistant ceramic materials. Macrosructure and microstructure casting determine the properties of a fusion-cast material. Some of these can be predicted from phase diagrams. Non-equilibrium structures are, however, just as common. Examples of the various cases are discussed for typical industrially important compositions, not only in the oxide systems but in several non-oxide systems.
Similar content being viewed by others
References
E. Rudy, D. P. Harmon and C. E. Brukl, AFML-TR-65-2 Part IVII, (1966) p. 65.
R. N. McNally, F. I. Peters and P. H. Ribbe, J. Amer. Ceram. Soc. 44 (1961) 491.
R. V. Sara, C. E. Lowell and R. T. Delloff, WADD-TR-60-143 Part IV (1963).
R. V. Sara, J. Amer. Ceram. Soc. 48 (1965) 243.
G. Samsonov, N. Zhuravlev and J. G. Amnvel, Fiz. Metall. Metallov. 3 (1956) 309.
R. T. Dolloff, WADD-TR-60-143 July (1960).
R. P. Elliott, U.S.E.A.C. Contract No. AT (11-1)-578.
J. White, Refractories J. 39 (1963) 126.
Idem, Science of Ceramics 2 (1965) 305.
Idem, J. Aust. Ceram. Soc. 9 (1973) 26.
Idem, ibid. 9 (1973) 64.
Idem, ibid. 10 (1974) 1.
B. Phillips and A. Muan, J. Phys. Chem. 64 (1960) 1451.
J. C. Wilshee and J. White, Trans. Brit. Ceram. Soc. (1967) 541.
L. H. Van Vlack, J. Amer. Ceram. Soc. 43 (1960) 140.
L. J. Manfredo, G. R. Fischer and R. N. McNally, to be published.
J. D. Hunt and K. A. Jackson, Trans. A.I.M.E. 236 (1966) 843.
K. A. Jackson, “Mechanism of Growth, Liquid Metals and Solidification” (ASM, Metals Park, Ohio, 1958) p. 174.
D. R. Uhlmann, reported by A. M. Alper in “Ceramic Microstructures” edited by R. M. Fulrath and J. A. Pask (John Wiley and Son, New York and London, 1968) p. 763.
F. L. Kennard, R. C. Bradt and U. S. Stubican, J. Amer. Ceram. Soc. 56 (1973) 566.
A. M. Alper, R. N. McNally, P. H. Ribbe and R. C. Doman, ibid. 45 (1962) 263.
A. M. Alper, R. N. McNally, R. C. Doman and R. G. Keihn, ibid. 47 (1964) 30.
F. Massazza and E. Sirichia, Chim. Ind. 40 (1958) 378.
A. M. Alper, R. C. Doman and R. N. McNally, Science of Ceramics 4 (1968) 389.
E. Rudy, AFML-TR-65-2 Parts IV and V.II (1966).
W. J. Minford, F. L. Kennard, R. C. Bradt and V. S. Stubican, “Ceramic Microstructures” ed. R. M. Fulrath and J. A. Pask (Westview Press, Boulder, Colorado, 1976) p. 456.
R. N. McNally and G. H. Beall, J. Mater. Sci. 14 (1979) 2596.
A. M. Alper and R. N. McNally, British Patent No. 966,269.
R. C. Doman, A. M. Alper and R. N. McNally, J. Mater. Sci. 3 (1968) 390.
K. A. Jackson, J. D. Hunt, D. R. Uhlmann and T. P. Seward, Trans. A.I.M.E. 236 (1966) 49.
P. H. Ribbe and A. M. Alper, J. Amer. Ceram. Soc. 47 (1964) 162.
J. W. White, “High Temperature Oxides, Part I”, edited by A. M. Alper (Academic Press, London and New York, 1971).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Bardhan, P., McNally, R.N. Fusion-casting and crystallization of high temperature materials. J Mater Sci 15, 2409–2427 (1980). https://doi.org/10.1007/BF00550743
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00550743