Abstract
A technique is described for demonstrating the flaws at which fracture initiates in injection-moulded polystyrene. The primary flaws are shown to be the same features as occur at the foci of secondary fractures in this polymer.
Similar content being viewed by others
References
B. Maxwell and L. F. Rahn, Soc. Plastics Eng. J. 6 (1950) 9.
C. C. Hsaio and J. A. Sauer, J. Appl. Phys. 21 (1950) 1071.
I. Wolock, J. A. Kiess, and S. B. Newman, in “Fracture” (Averback, Felbeck, Hahn and Thomas, Eds.) (John Wiley, New York, 1956).
A. C. Knight, Soc. Plastics Eng. Tech. Papers 12, 6 (1966) 1.
K. E. Hansen, and W. C. Forsman, J. Polymer Sci. A-2, 7 (1969) 1863.
H. Kolsky, in “Fracture” (1956) (loc. cit.)(
B. M. Murphy, Chem. Ind. (London) (1969) 289.
P. I. Vincent, Brit. J. Appl. Phys. 13 (1962) 578.
J. Murray and D. Hull, J. Polymer Sci. A-2, 8 (1970) 583.
D. G. Legrand, J. Appl. Sci. 13 (1969) 2129.
J. A. Kiess, A. M. Sullivan, and G. R. Irwin, J. Appl. Phys. 21 (1950) 716.
J. P. Berry, ibid 33 (1962) 1741.
J. Bailey, India Rubber World, 118 (1948) 225.
R. G. Cheatham and A. G. H. Dietz, Trans. ASME 74 (1952) 31.
R. J. Bird, G. Rooney, and J. Mann, Polymer 12 (1971) 742.
J. Murray, and D. Hull, J. Polymer Sci. A-2, 8 (1970) 1521.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Earl, B.L., Loneragan, R.J. & Crook, M. Crack initiation in polystyrene. J Mater Sci 8, 370–372 (1973). https://doi.org/10.1007/BF00550157
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00550157