Abstract
Prices for ferro-alloys have hardened due to the closure of plants in developed countries on account of increasingly stringent pollution control legislation, resulting in a higher cost of production. A ferro-alloy industry with a capacity of 80000 MT per annum was selected to study the nature of pollution. Because of the objectionable nature of polluting air in and around the plant it was located in a rural area where there was no other industry. The area was agriculturally active and there was no effective control system for this plant.
The quality of ambient air around the plant site is discussed in this paper along with the meteorological conditions. The maximum concentration of suspended particulate matter (SPM) was 768 µg/NM3 downwind of the plant, minimum 184 µg/NM3, and the average was more than 446 µg/NM3. The presence of heavy metals, viz. Fe, Mn, Cr and Pb, was also assessed. The concentration of Fe was 50 µg/NM3 downwind and 10 µg/NM3 upwind. The concentration of other metals followed a similar trend.
Similar content being viewed by others
References
EPA: 1973, Air Pollution Stationary Source Test Methods, Environmental Handbook.
Katz, M.: 1977, Methods of Air Sampling and Analysis, 2nd Edn., APHA., Washington, DC., U.S.A.
Stern, A.C.: 1976, Air Pollution, 3rd Edn., Vol. 5; Academic Press, New York.
NEERI: 1984, Report.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Reddy, M.K., Venkat Rao, D., Rama Rao, K.G. et al. Heavy metals in the SPM of air in the environment surrounding a ferro-alloy industrial plant in India. Environ Monit Assess 25, 109–118 (1993). https://doi.org/10.1007/BF00549132
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00549132