Abstract
Fibre reinforced plastics, with 50 to 55 vol % of aligned short carbon fibres of approximately 3 mm in length, have good mechanical properties and advantages in deformability during the manufacturing process of structural components. The mechanical properties and damage mechanisms of this kind of composite have not been investigated deeply in the past. In the present paper results of an examination programme on laminates with various stacking sequences and two thermoplastic matrix systems (polyimide and polyethersulphone) are given. It will be shown that composites reinforced with aligned discontinuous carbon fibres can be an alternative material to continuous-fibre reinforced composites when considering their static and fatigue properties.
Similar content being viewed by others
References
T. W. Chou and A. Kelly, Ann. Rev. Mater. Sci. 10 (1980) 229.
B. B. Moore, Proceedings of 3rd Risø International Symposium on Fatigue and Creep in Composite Materials, Roskilde, Denmark, September 1982 (Risø National Laboratory, Roskilde, Denmark) pp. 244–57.
K. Schulte, G. Horstenkamp and K. Friedrich, “Mechanical Properties of Aligned Short Carbon Fibre Reinforced PES and PI Laminates”, European Space Agency, Technical Translation No. ESA-TT-898, February 1985, Translation of DFVLR-FB-84-24, (Wissenschaftliches Berichtswesen der DFVLR, Köln, West-Germany, 1984) pp. 1–100.
H. Richter, “Verarbeiten und Anwenden kohlenstoffaserverstärkter Kunststoffe” (VDI-Gesellschaft Kunststofftechnik, Düsseldorf, West Germany, 1981) pp. 243–57.
K. Schulte, E. G. Henneke II and J. C. Duke, Proceedings of DGM conference “Verbundwerkstoffe — Stoffverbunde”, Konstanz, West Germany, May 1984, (Deutsche Gesellschaft für Metallkunde, Bad Homburg, West-Germany, 1984) to be published.
H. T. Hahn and R. W. Kim, J. Compos. Mater. 10 (1976) 156.
K. Schulte, K. L. Reifsnider and W. W. Stinchcomb, Proceedings of 18 AVK-Jahrestagung, Freudenstadt, West Germany, October, 1982, (Arbeitsgemeinschaft Verstärkte Kunststoffe, Frankfurt, West-Germany, 1982) pp. 29.1–29.8.
M. J. Owen, “Fracture and Fatigue”, edited by L. J. Brontman (Academic, New York, 1974) pp. 242–56.
K. L. Reifsnider, Proceedings of the 14th Annual Meeting, Society of Engineering Science, Lehigh University, Bethlehem, USA (The American Society for Mechanical Engineers, 1977) pp. 343–384.
J. E. Masters and K. L. Reifsnider, ASTM STP 775 (American Society for Testing and Materials, Philadelphia, 1982) pp. 40–62.
A. L. Hinghsmith and K. L. Reifsnider, ibid., pp. 103–40.
H. Helm, “Bruch- und Schwingfestigkeitsverhalten von uniaxialen Kohlenstoff-Kurzfaser/Epoxidharz-Verbunden”, Internal report, Ruhr University Bochum-DFVLR (Wissenschaftliches Berichtswesen der DFVLR, Köln, West-Germany, 1981) pp. 1–49.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Friedrich, K., Schulte, K., Horstenkamp, G. et al. Fatigue behaviour of aligned short carbon-fibre reinforced polyimide and polyethersulphone composites. J Mater Sci 20, 3353–3364 (1985). https://doi.org/10.1007/BF00545205
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF00545205